Capital Project Administration - Madhya Pradesh

39298302 repairing of plaster, water proofing, drainage, steel welding, white wash, seevage chambers and miscellaneous work internal building area ( a wing ) in section no. 02, vindhyachal bhawan, bhopal....

Capital Project Administration - Madhya Pradesh

39298239 repairing of plaster, water proofing, drainage, steel welding, white wash, seevage chambers and miscellaneous work internal building area (c wing) in section no. 02, vindhyachal bhawan, bhopal....

Capital Project Administration - Madhya Pradesh

39298174 repairing of plaster, water proofing, drainage, steel welding, white wash, seevage chambers and miscellaneous work internal building area (d wing) in section no. 02, vindhyachal bhawan, bhopal....

Capital Project Administration - Madhya Pradesh

39298098 repairing of plaster, water proofing, drainage, steel welding, white wash, seevage chambers and miscellaneous work internal building area (b wing) in section no. 02, vindhyachal bhawan, bhopal....

Madhya Pradesh Madhya Kshetra Vidyut Vitaran Company Limited - Madhya Pradesh

39257287 tender for supply, installation and commissioning of it equipment’s for advanced metering infrastructure unified command control centre ( uccc ) at mpmkvvcl, bhopal 1 led commercial tv 2 switch with rack 3 laying of lan cable with casing 4 creation of i/o points 5 laying of optical fibre line from dc to scada 6 laying of telephone lines with casing 7 10 kva ups + 12v 100 ah 40 nos. smf lead acid battery bank 8 ip camera 9 poe switch 8 port manageable for ip cameras 10 smoke detector satellite only 11 fire extinguisher 5 litre 12 public address satellite/speaker roof mounted 13 split ac 2 ton inverter 5 star 14 wall fan 15 white wash walls 16 water proofing of walls 17 water proofing of roof 18 glass/wooden partition cabins 19 installation of led lights 2x2 roof panels 20 window blinds of size 5ft. x 4ft. approx. 21 white wash walls ...

Military Engineer Services - Madhya Pradesh

39252205 tender for provision of guard room with toilet block athffr at inf school under ge ( mis ) mhow; 1 b / r works: 2 surface dressing not exceeding 15 cm deep in soft / loose soil all as specified . 3 excavationover areas not exceeding1.5 m deep and getting out in soft / loose soil complete all as specified 4 m& for moorum / red bajri filling in floors or pavings, laid in layers not exceeding150mm thick, spread, levelled and rammed includingwatering as required complete all as specified 5 returning, filling in soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm. 6 removing excavated material ( soil ) not exceeding50m and depositing where directed at a level not exceeding 1.5 m above the starting point 7 m&l for plaincement concrete 1:4:8type d2using 40mm graded stone aggregateas in foundation, filling and mass concrete and sub base of floor complete all as specified 8 m&l forrccm 25 grade concrete ( using20mm graded aggregate ) as in foundation, footings, plinth protection and similar rcc works all as specified. note : reinforcement shall be measured and paid separately under relevant item. 9 m&l forrccm 25 grade concrete ( using20mm graded aggregate ) as in slabs supported on walls, , chajjas, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified .note : reinforcementshall be measured and paid separately under relevant item 10 m&l forrccm 25 grade concrete ( using20mm graded aggregate ) as in roof beam, plinth beam, roof beam, lintel beams and columns complete all as specified.note : reinforcementshall be measured and paid separately under relevant item 11 m&l forrccm 25 grade concrete ( using20mm graded aggregate ) as in chajjas complete all as specified .note : reinforcementshall be measured and paid separately under relevant item 12 m&l forrccm 25 grade concrete ( using20mm graded aggregate ) as incolumns, footing, pillars, piers, posts and struts complete all as specified .note : reinforcementshall be measured and paid separately under relevant item 13 m&l for mild steel tmt bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, footing, roof beam, plinth beam, slab, chajjas and similar work hooking ends and binding with and including mild steel wire ( annealed ) not less than 0.9mm dia or securing with clips complete all as specified 14 all as peritem no 12above but 5 mm dia and over up to and including 10 mmdia as in stirrups 15 m&l for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits ( if any ) of foundation and plinth beams; and similar work; vertical or to batter etc.complete rough finished surface of concrete 16 m&l for formwork to sides of pillars, posts, struts, piers, columns and stanchions etc complete rough finished surface of concrete 17 m&l for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick ( horizontal or sloping ) complete rough finished surface of concrete 18 m&l for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete rough finished surface of concrete 19 m&l for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of rcc / pcc bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete rough finished surface of concrete 20 m&l for brickwork with modular fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm ( 1:4 ) complete all as specified 21 m&l for 15 mm thick rendering in cm 1:6 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified 22 m&l for 15 mm thick rendering in cm 1:4 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified 23 m&l for 5 mm thick rendering in cm 1:3 onbrick work or concrete surfaces, surfacesfinished even and smooth without using extra cement complete all as specified 24 m&l for 75 mm thick , pcc 1:3:6 type c2 ( using 20mm graded stone aggregate ) as in plinth protection finished the surfaces of concrete topping even and fair ( without using extra cement ) including making joint at every 3 minterval and at corner and filled with mixture of bitumen and sandlaid in alternate bays complete all as specified 25 m&l for preparation of newly plastered surfaces of wall and applying two coat ofsuperiorquality exterior weatherproof water base emulsion paint over a coat of primer of same make on wall completeall as specified and directed. note : ( a ) each stage i.e preparation of surfaces, application of primer, application of first coat.application of second coat shallbe approved by engineer in charge ( b ) written warranty for four years shall befurnished by contractor 26 m&l for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer complete all as specified 27 m&l for preparation of new plastered surfaces of walls and applying three coats of white wash on ceiling surface complete allas specified 28 m&l for machine cut kota stone slab flooring 20 mm thick ( + 2mm ) of size58cm x 58cm ( or nearest size as available in the market ) laid over and including 25 mm thick pcc 1:2:4 type b1 using 20mm graded stone aggregate and 15mm thick screed bedin cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and mirror polishingfinishcomplete all as specified 29 s&fpre painted steel sliding window 3 track, 2 glass panel and 1 mesh panel sliding window fabricated from roll formed sections made of galvanized steel colour coated / powder coated ( base steel as per is 513 ‘d’ quality, galvanized as per is 277 with zinc of 120 gm / sq.mtr ) with total coated thickness of 0.58mm. primer coat with epoxy primer of 5 7 microns thick, finish painted with a polyester paint of 12 16 microns thick and back coated with alkyd backer of 5 7 microns or powder coated with pure polyester powder up to 50 60 microns thick. section for external frame should be of 107x44mm, section for shutter should be of 35x49mm. section of mesh should be of 35 x 49 mm.the windows should be paneled with 5mm thick plain clear glass. corner bracket for internal and external frame made of glass filled nylon. gaskets are to be made of ethyl propylene diamine monomer ( epdm ) .the sections are to be cut to length, joined and assembled by means of corner bracket. the above frames should be fixed to the concrete / masonry walls by means of self expandingscrewscomplete all as specified and directed . 30 s&fair tight windows top hung type made with galvanised steel colour coated / powder coated ( base steel as per is 513 of “d quality, galvanized as per is 277 with zinc of 120 grams / sqm ) with total coating thickness of 0.58 mm, coated sections should be with epoxy primer of 5 7 microns thick, finish painted with a polyester paint of 12 16 microns thick and back coated with alkyd backer 5 7 microns thick or powder coated with pure polyester powder up to 50 60 microns thick, outer frame section 46x52x0.58 mm, shutter section 46x46x0.58mm, mullion section 46x70x0.58mm, beading section 18x25x0.58 mm, windows panelled with 5mm thick plain clear glasswith epdm ( ethyl propylene diamine monomer ) gasket and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of high grade aluminium powder coating and nylon receiver, corner brackets made of crca ( cold rolled close annealed ) with zinc phosphate, mullion caps made of glass filled nylon, frames fixed to the concrete / masonry wall by means of self expanding screws complete all as specified and directed 31 m&l for glazed ceramic coloured tile of size 450mm x 300 mmx6 to 7mm thick as in dados or skirting over and including rendering 10mm thick in cm ( 1:4 ) , jointed in neat grey cement slurry and pointed incolour cement to match colour oftile all specified. 32 m&l for non skid ceramic coloured tiles7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, over andincluding 20mm thick screed bed in cm ( 1:6 ) asin floors etc set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles allas specified 33 s&fwash hand basins, vitreous china, of size 550x400mm ( flat back, or angle back type ) including cutting for and pinning in ends of brackets or errecting stand exclusive of fixing of supply and waste pipe etc complete all as specified 34 s&fvitreous china squatting pan, ‘orissa’ pattern of size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe ) complete all as specified. 35 s&f pvc valveless, syphonic action type flushing cistern 10 litres capacity , low / high level white with inlet ball valve float and handle including brackets complete all as specified 36 s&fvitreous china urinal half stall type 350x390x600 mm ( minimum ) height with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar complete all as specified. 37 s&f cp brass urinal spreader suitable for 15 mm dia pipe. 38 s&f urinal partition of size 900x450 mm with hpl board 10 to 12mmthickfixed with brackets complete all as specified 39 s&f pvc waste pipe40mm / 32mm bore suitable for wash hand basin / sink / urinal outlet complete all as specified & directed. 40 s&f 75 mm bore pvcfloor traps plain with grating and 300 mm long out let including necessary jointing 41 s&f pvc pipe 40 mm dia, in any length and in any position such as walls, ceiling or laid in floor or trenches etc. complete all as specified 42 s&f pvc bend for 40mm dia pvc pipe 43 s&fpvc bends 75mm bore, any radius 44 s&fpvc ( swr ) pipe 110 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified 45 s&fpvc ( swr ) pipe 75 mm dia single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified 46 s&f bib taps ( push type ) cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm borecomplete all as specified 47 s&f fancy type chromium plated two way bib cock of 15mm bore, screwed for iron pipe or brass ferrule etc complete all as specified . 48 s&f pillar taps ( swan neck ) , fancy typecast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified 49 s&f stop / angle cock cast copper alloy high pressure, angle valve type, chromium plated suitable for 15mm bore steel pipecomplete all as specified 50 s&fhealth faucet with stainless steel flexible pipe of 1.00 to 1.50 metrelength including holdercomplete all as specified 51 s&f pvc connection of 450mm longsuitable for 15mm dia iron pipe including ptmt nuts complete all as specified 52 s&f 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified 53 all as per serial item no.51 abovebutfor 20mm bore. 54 s&fgun metal, globe or gate valve 15mm dia with iron wheel head , screwed both ends for iron pipe and fixed. 55 s&f 20mm boreball valve highpressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipecomplete all as specified 56 s&f rotational moulded polythylenewater storage tank 500 litres capacitydouble layered , cylindrical , vertical with closte top , hoisted and fixed in position all as specified in ssr part icomplete 57 s&f sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm vide with chromium plated bracket guard and railing 60cm long complete. 58 s&fbevelled edge mirror of 5 to 6 mm thick selected quality glass of size 600 x 450 mm mounted on 6mm thickac building board or commercial plywood andfixed to wooden plug with chromium plated brass screw and cup washers complete complete all as specified 59 s&f pressed steel frame of size 105 mmx60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified 60 s&f steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete 61 s&f pvc door frame of size 50mm x 47 mm made out of 5 mm prelam pvc sheet reinforced with ms square tube in opening of suitable size complete all as specified 62 s&f factory made ( prelam on both sides ) solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of ms tubes for top and bottom rails, ms frame shall covered with heat moulded prelam pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for styles and prelampvc sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam pvc sheet to be filled in the ms welded / sealed to the styles and rails with suitable pvc sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified 63 s&f 100mm long butt hinges medium weight cold rolled mild steel complete all as specified 64 s&faluminium anodized barrel tower bolts of length 150mm of extruded section 65 s&fmild steel pressed handle of size 150 mm, oval type, stove enamelled black complete all as specified 66 m&l for preparation of surfaces for applying bituminous primer ( conforming to is 3384 1965 ) @ 0.40 kg / sqm complete. 67 m&l for applying a tack coat of industrial bitumen grade of 85 / 25 at the rate of 1.2 kg per sqm including cleaning surfaces complete all as specified 68 m&lfor app based polymeric membrane minimum weighing 3kg / sqm and minimum 3mm thick reinforced with polyster non woven fabric ( weightnot less than 150 gm / sqm ) laid on primed surface by forced application complete all as specified 69 m&l for applying two coats of bitumen based aluminium painting @ 0.15 kg / sqm each coat on water proofing treatment includingpreparation of surface as on non assesible area complete all as specified 70 e / m portion: 71 m&l for point wiring with fr lshpvc insulated pvc unsheathed electriccable 1100v grade single core having multi stranded copper conductor of size 1.5 sqmm nominal cross sectional area drawn in & including non metallic rigid pvc conduit isi marked medium grade not less than 20mm dia with all conduit accessories in concealed wiring system by cutting of wall and making good and matching disturbed surface of wall with existing surface of wall ( cutting except on ceiling for fan point only, on ceiling instead of pvc conduit surface casing caping shallbe used ) & 1.5 sqmm green fr lspvc insulated unsheathed copper conductor as earth wire connected to commonearth dolly by providing lugs including galvanised boxes and bakelite sheetfor mounting switches, sockets, fan regulators etc for one light point / fan point controlled by one switch. make of pvc conduit / casing caping: plaza / finolex / polycab / kalinga / jindal / asian. 72 one light point controlled by one switch 73 one exhaust fan point controlled by one switch 74 one 5 amps socket out let point controlled by one switch on same board with other switches. 75 one 5 amps socket out let point on independent board controlled by one switch. 76 all as per item no 69 here in before but using pvc insulated unsheathed 2.5 sqmm cross sectional area cable for phase / neutral & for earth 2.5 sqmm green pvc insulated cable for 15 amps socket point on independent board controlled by one switch. 77 s&f switchpiano flush button single pole one way 6 amp 240 volt 78 s&f socket outlet flush type 5 pin, 6 amps, 230 volts 79 s&f switch piano flush button single pole one way 15 amp 240 volt 80 s&f socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 amp, 230 volts 81 s&f ceiling rose surface bakelitethree terminal 82 s&f electronic fan regulator step type 83 s&f integrated led tube light fitting 1x18 / 20 watt, 6000kcomplete fitting with all accessories duly connection with three core flexible coppercable duly fixed on two nos of pvc square boxescomplete all as specifiedmake: havells cat no. lhexblp7pn1w018 , bajaj cat pt no. bclsb 18whor otherequivalent in wipro 84 s&f integrated led tube light fitting 1x9 / 10 watt, 6000kcomplete fitting with all accessoriesduly connection with three core flexible coppercable duly fixed on two nos of pvc square boxcomplete all as specified and directed. make: havells cat no. lhexblp7in1w009 bajaj cat pt no. bclsb 10 wh or other equivalent in wipro 85 s&f led street light fittings 1x30 watt, 5700k complete fitting having pressure dia cast aluminium housing with heat resistant toughened glass & ip 65 protection fixed on and including sufficient length and appropriate size gi bracket with all accessories duly connection with three core flexible copper cable complete all as specified make: havells cat no.lhexayp7pn6k030 crompton cat no. lsto 25 cdl, bajaj cat no. bclst 25w led iv2 86 s&f double door tpn dbs four wayof powder coated dbs suitable for mcbs fitted with bus bar, neutral link, earth bar and din ral complete all as specified make: hpl / l&t / hpl / havells 87 s&f double door spn dbs 4 wayof powder coated dbs suitable for mcbs fitted with bus bar, neutral link, earth bar and din ral complete all as specified 88 s&f double door spn dbs 8 wayof powder coated dbs suitable for mcbs fitted with bus bar, neutral link, earth bar and din ral complete all as specified 89 s&f mcb tpn 40 to 100 amps415v 10ka c curve fixedindb complete 90 s&f mcb spn 6 to 32 amps10 ka, b series including connection with suitable size aluminium / copper lugs complete all as specified 91 s&f mcb sp 240 volts 6 to 32 amps, 10 ka breaking capacity, b series including connection with suitable size aluminium / copper lugs complete all as specified 92 s&f ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 v, 1200 mm sweep. minimumair delivery 210 cfm with service value 6.00 bee. 5star rated with brushless direct current motor ( bldc ) . complete all as specified make: havells / bajaj / crompton. 93 m&l for sub main wiringwith two runs of single core frlspvc insulated unsheathed cable 1100 volts grade, 4 sqmm size with multistranded copper conductor, drawn in and including non metallic rigid pvc conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including frls pvc insulated unsheathed 4.0 sqmm cable with multistranded copper conductor green pvc insulated as continuous earth conductor cable connected to earth dolly from main distribution board complete all as specified . 94 s&f exhaust fan 300mm sweep, ac single phase 230 volts, metallic type, complete with louverincluding electric connection with suitable size copper conductor cable, clamps, nuts, bolts etc including making hole of appropriate size in the existing brick wall and making good the disturbed wall tomatch with the existing surface of wall complete all as specified and directed by engineer in charge. make : havells model:ventil air dx white or otherequivalent in / bajaj / crompton. 95 m&l for earthing complete with galvanized steel earth plate electrode 60cm x 60cmx 6.3 mm thick buried directly in ground ( earth pit not less than 2.25 meter deep below ground level ) with the top edge of the earth plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4mm dia by means of bolts, nuts, check nuts and washer of galvanized iron or of steel all as shown in electrical plate no.5 of messsr parts i and including excavation & earth work in any type of soil , disposal of soil , providing alternate layers of charcoal and common salt, construction of pcc earth chamber in mix 1:3:6 type c1 , 40 mm thick rcc 1:2:4 type b1cover reinforced with 8mm dia ms bars both ways with lift hook made out of 8 mm dia bar, watering arrangement with funnel and wiremesh and watering pipe of 20mm dia gi light grade and 15mm dia light grade pipe for earth lead protection and testing on completionall as specified and directed. 96 excavation in trenche not exceeding 1.5m wide andnot exceeding 1.5m indepthgetting out in hard / dense soil for laying cable / errecting poles , stay assembly all as specified. 97 returning and filling in soil including spreading levelling watering and well ramming in layers not exceeding 25cm all as specified. 98 removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point. 99 s&f medium grade galvanised iron tube with all fittings and fixed completeon walls and ceilings or laid on floors of 50 mm bore 100 s&f medium grade galvanised iron tube with all fittings and fixed completeon walls and ceilings or laid on floors of 25 mm bore 101 s&f ballvalves, high pressure of ptmt with epoxy coated aluminium rod & high density plastic ballscrewed for iron pipe and fixed suitable for 25mm bore dia of pipe ( minimum weight 455 gms ) 102 supply, lowering, install, testing and commissioning submersible pump set of capacity 10 hp slip start synchronous run motor ( s4rm / bldc type ) , pump 20 stage, 143 metrewith ss 304 impeller, shaft duplex steel, casing ss 304, pump motor ss 304 suitable for 6 bore well includingsuitable control panel for pumpset , smart vfd driven with phase reversal protection, dry run protection, over & under voltage protection, fault indication alarm, energy monitoring and remote monitoring system for access through mobile or computer by manufacturer application for 5 year of period by providing sim card. including provision ofms cover for borewell and suitable clamp to hold the submersible pumpset including provision of suitable size rope of required length complete all as specified and directed by engineer in charge. 103 s&fpvc insulated sheathed 1100 volt grade copper conductor cable flat multi stranded for submersible pumps of3 core 6 sqmm as in motorsforbore well all as specified and directed...

West Central Railway - Madhya Pradesh

38620668 tender for crws complex / nsz / bpl : zonal works 2023 24 consisting of part a annual zonal work for white wash, colour wash, distempering etc. and painting of crws complex for the year 2023 24 coasting upto 5.00 lakh each in crws complex ( including gsd area ) in the jurisdiction of sse / works / crws / bpl as per ussor 2011 of west central railway. part bannual zonal work for minor repairs of civil engineering assets and supply of building materials for the year 2023 24 costing up to 5.00 lakh each in crws complex ( including gsd area ) in the jurisdiction of sse / works / crws / bpl as per ussor 2011 of west central railway. part c annual zonal work for repairing / maintenance and job work ( ns items ) of civil engineering assets for the year 2023 24 costing up to 5.00 lakh each in crws complex ( including gsd area ) in the jurisdiction of sse / works / crws / bpl, as directed by the engineer....

Bharat Sanchar Nigam Limited - Madhya Pradesh

38388576 tender for repair of wooden doors,window glass panes,ms jail/mesh,sewer cleaning including white wash work in t iv quarter block near community hall at brbraitt jabalpur....

Bharat Sanchar Nigam Limited - Madhya Pradesh

38279831 tender for repair/mainten ance of qtr by replacing of damaged floor with tiles work, inside white wash and other civil repair works in t iv (35) quarter at brbraitt campus, jabalpur....

Nagar Palika Parishad - Madhya Pradesh

37947205 tender for supply of construction material for the period 2023 24under np isagarh 2 moorum 3 crusher dust 4 wmm 5 gsb 6 standard bricks ( local ) 7 ms binding wire 8 gii fancing wire 9 ms angle 10 lime powder ( white wash ) 11 boulder ( stone ) 12 flag stone 40mm 13 flag stone 75mm 14 rcc hume pipe ( np3 ) 300mm dia 15 rcc hume pipe ( np3 ) 600mm dia 16 rcc hume pipe ( np3 ) 450mm dia 17 rcc hume pipe ( np4 ) 1000mm dia 18 rcc hume pipe ( np4 ) 1200mm dia 19 cement ( 1 beg 50kg. ) 20 rcc half round hume pipe ( size 12 inchx 1 meeter ) ...

Western Railway - Madhya Pradesh

37681147 tender for zone no 07 ujjain proper: km 21 / 6 to 22 / 6 and ftd excluding to ujn. white wash / color wash , all items of chapter 13 of cpwd dsr 2021except item no 13.1 to 13.36 and 13.72 to 13.79 and item covered in sch b ( in this schedule rcc oh tank will be painted in addition to other works as per instruction of engineer incharge ) ...

Western Railway - Madhya Pradesh

37681137 tender for zone no.4 c ratlam white wash & colour wash etc. work on service building, staff quarters & kurel dam under sse / works 1 and 2 ( east ) ratlam....

Nagar Palika Parishad - Madhya Pradesh

37669041 tender for material supply at nagar parishad badarwas district shivpuri 1 jal praday samgripurchase 2 mooram 3 crusher dust 4 stander bricks local 5 fly ash brick 6 gi chain link fencing 7 ms binding wire 8 gi fencing wire 9 ms angle 10 lime powder white wash 11 boulder stone 12 flag stone 40 mm 13 flag stone 75 mm 14 rcc hume pipe np3 300 mm dia 15 rcc hume pipe np3 600 mm dia 16 rcc hume pipe np4 1000 mm dia 17 road roller 8 10 ton with operator 18 rcc half round hume pipe size 12 inch 1 meter 19 copra 20 rcc pole 5 feet 4 inch 4 inch 21 khanda chinkhari 8 inch...

Bharat Sanchar Nigam Limited - Madhya Pradesh

37668221 tender for repair of wooden doors, jali, cleaning & provision of ms angle platform including white wash work in t iv (38 42) quarter block to use as hostel for trainee at brbraitt jabalpur...

Nagar Palika Nigam - Madhya Pradesh

37284509 inviting rates of construction material with complete work given below for yearly ( 2023 24 ) providing and applying all types of painting as mentioned paint 2 floor painting with emulsion paint ( sqm ) 1st coat. 3 floor painting with emulsion paint ( sqm ) 2nd coat. 4 floor painting with emulsion paint ( sqm ) 3rd coat. 5 emulsion paint ( sqm ) 1st coat. 6 emulsion paint ( sqm ) 2nd coat. 7 emulsion paint ( sqm ) 3rd coat. 8 oil bond distemper ( sqm ) 1st coat. 9 oil bond distemper ( sqm ) 2nd coat. 10 oil bond distemper ( sqm ) 3rd coat. 11 white cement ( sqm ) 1st coat. 12 white cement ( sqm ) 2nd coat. 13 white cement ( sqm ) 3rd coat. 14 oil paint ( sqm ) 1st coat. 15 oil paint ( sqm ) 2nd coat. 16 oil paint ( sqm ) 3rd coat. 17 putty painting with wall putty ( sqm ) 1st coat. 18 putty painting with wall putty ( sqm ) 2nd coat. 19 putty painting with wall putty ( sqm ) 3rd coat. 20 white wash with lime ( sqm ) 1st coat. 21 white wash with lime ( sqm ) 2nd coat. 22 white wash with lime ( sqm ) 3rd coat. 23 sury cem. ( sqm ) 1st coat. 24 sury cem. ( sqm ) 2nd coat. 25 sury cem. ( sqm ) 3rd coat. 26 water proof primer ( sqm ) 1st coat. 27 water proof primer ( sqm ) 2nd coat. 28 water proof primer ( sqm ) 3rd coat. 29 water proof wall putty ( sqm ) 1st coat. 30 water proof wall putty ( sqm ) 2nd coat. 31 water proof wall putty ( sqm ) 3rd coat....

Military Engineer Services - Madhya Pradesh

37273853 repair replacement to flooring plastering plumbing joinery sanitary fitting and certain misc work in zone b and c of age br i under ge mis mhow. 1 demolition of brick work built in cement mortar including all quions , arches , pillars etc complete all as specified 2 m&lfor brick work with sub class b bricks with using modular size brick , straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified 3 all as per item no 02 above but except bricks .note:serviceable bricks obtained from dismantling shall be reused. 4 taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. 5 m&l for rendering 15mm thick plaster in cement mortar 1:6onfaces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified 6 m&l for rendering 15mm thick plaster in cement mortar 1:4onfaces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified 7 m&l for rendering 5mm thick plaster in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete all as specified 8 m&l for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistance primer over a coat of putty complete all as specified 9 m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified 10 m&l for preparation of newly plastered surfaces of wall, pillasters, cornices etc ( upto g+3 storied building ) scrapping down , brooming down or steel wire brushing, and washing the surface andapplying two coats of anti fungal weather coat paint ( exterioremulsion ) white or tinted over a coat of primer ( x2 ) complete all as specified anote : ( a ) each stage i.e preparation of surfaces, application of primer, application of first coat.application of second coat shallbepassed by engineer in charge. ( b ) written warranty for four years shall be submitted by contractor after completion of work . 11 m&l for preparation of newly plasteredsurfaces of ceiling and applyingthree coats of white washcomplete all as specified 12 m&l for preparation of wall surface and application of following water based epoxy resin coating as a dampness treatmentfor internal wall includingfilling of cracks withcm ( 1:4 ) and making the surface smooth and finishin repair complete all as specified. ( a ) complete removal of treatment / plaster ( as required ) on internal wallsand preparation of surface andrendering with cm ( 1:4 ) for application and making the surface wet . ( b ) applyingfirst coat of dr. fixit dampguard in ratio ( 1u base:1u hardner:1u water ) in one direction and leaving the coat to dry for 6 to 8 hrs. ( c ) applying second coat of dr. fixit dampguard in ratio ( 1u base:1u hardner:1u water ) in perpendicular direction to the first coat applied and leaving the surface to dry for 24 hrs. material: dr. fixit dampguard or other equivalent as approved by ge. 13 dismantling of floor, hearth , or wall tiling including cement mortar bedding ( but not backing ) and rubbish off the primeses complete all as specified 14 m&l for glazed ceramic coloured tiles300mm x 200mmsize, 6 to 7mm thick in dados or skirting over and including rendering 10mm thick in cm ( 1:4 ) , jointed in neat grey cement slurry and pointed incolouredcement to match with colour of tile complete all as specified 15 m&l for glazed ceramic colouredtiles 450x300x 6mm to 7mm thick as in vertical surface as in skirting / dados , set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 10 mm thick rendering in cm 1:4 complete all as specified 16 m&l for non skidceramic colouredtiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed or bedding layer in cm 1: 6 complete all as specified 17 m&l for non skidceramic colouredtiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colouredcement to match with colour of tile over and including 15mm thick screed bed in cm 1: 6 complete all as specified 18 m & l forvitrified ceramic tiles of size 10 mm thick ( light shade ) ( square / rectangular ) area of each tilenot exceeding0.36 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement to match with colour of tile over and including 15mm screed bed in cm 1:6complete all as specified 19 all as per item no 18 above but in skirting over & including 10mm thickbacking coatin cm 1:4 complete all as specified 20 demolition of stone slabs and tiles of any description or thickness in floors complete all as specified 21 m & lfor machine cut kota stone slab inflooring 20 25mm thick laid over and including 15mm thick screed bed in cm 1:6 & cement mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified 22 all as per item no21 above butin skirtingincluding10mm thickbacking coat in cm ( 1:4 ) complete all as specified 23 m&lforchequered cement concrete tiles with grey cementand pigment of size 40cmx40cmx30mm thick ( glosy finish ) , set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in cm 1:6complete all as specified 24 m&l for machine pressed rubber mouldedprecast concrete interlocking paver block ( glosy finish ) any shape and size confirming to is 15658 2006 of 60 mm thickness, m 35 grade with grey cement and pigmentlaid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed. note: sand cushioningshall bemeasured & paid seperately under relevant item. 25 m&l for machine pressed rubber mouldedprecast concrete interlocking paver block ( glosy finish ) any shape and size confirming to is 15658 2006 of 80 mm thickness, m 40 grade with grey cement and pigmentlaid on 50 mm thick stone dust cushioning laid dry to the profile complete all as directed. note: sand cushioningshall bemeasured & paid seperately under relevant item. 26 m&l for stone dust filling under floors 50mm thickincluding watering and consolidation. 27 demolition of cement concrete ( unreinforced ) in ground floors and paving n exc. 15cm thickness ( below or above ground level ) complete. 28 m&l for pcc ( 1:5:10 ) type e2 using 40mm graded stone aggregate as in foundations, filling and mass concrete, sunken floors complete all as specified 29 m&l for 75 mm thick pcc 1:3:6 type c2using 20mm graded stone aggregateas in plinth protection, finished thesurface of concrete topping even and fair ( without using extra cement ) including making joint at every 3 minterval and at corner and filled with mixture of bitumen and sand , laid in alternate bays complete all as specified 30 m & lfor plain cement concrete 1:2:4 type b1 using 20mm graded stone aggregate, 40mm thick as in floor, coping, finish the surfaces even and smooth with using extra cement complete as specified 31 m & l for provide pvc spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in pcc ( 1:2:4 ) , type b1 using 20mm graded stone aggregate complete all as specified. 32 m & l for cutting holes in brick walls built in cement mortar at the starting point of down take soil / waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in cm 1:3and making good the dismantled portion in pcc ( 1:2:4 ) , type b1using 20mm graded stone aggregate complete all asspecified. 33 s&f in repair ofvitreous china squatting pan “orissa” pattern, of size 580mm x 440mm white with integral foot rests ( excluding flushing cistern and flush pipe ) including provisionof cement concrete bedding complete all as specified 34 supply and fixin repair ofwash hand basins, vitreous china, of size 550x400mm ( flat back, or angle back type ) including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified 35 s&f in repairs of pedestal pattern vitreous china wash down water closet pan white colour, with 110mm pvc ( swr ) ptrap including necessaryjointing offront or back inlet, connection to drain ( or out going pipe ) and to flushing pipe antisyphonagepipe and plastic water closet seat cover whitecomplete all as specified 36 s&f in repair of vitreous china uninal bowl, half stall type 350x390x600mm ( minimum ) , colouredwith ptmturinal spreader for fixing with 15 mm dia pipe / union for discharge pipe, , providing and fixing plugs, bedding urinalagainst the wall in cement mortar ( 1:2 ) , securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in coloured cement to match with urinalcomplete all as specified 37 s&fin repairs of urinal spreader of ptmt any colour for fixing with 15 mm dia pipe. ( minimum weight 60gms ) 38 s & f in repaircp brass fancy type 15mm bore bib tap, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified 39 s & f in repair15 mm bore bib tapstandard of ptmt any colour high pressure screwed for iron pipe and fixed all as specified 40 s&f in repair15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nutscomplete all as specified 41 s&f in repair15mm bore, 450mm long, pvc connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified 42 s&f in repaircp fancy type angle valves, cast copper alloy, screwed both ends for iron pipe orforunionof 15mm bore complete all as specified 43 s & f in repairscp brass fancy type shower rose 75 mm dia with 125mm long cp nipple of approved quality complete all as specified 44 s&f in repairscp brass fancy type shower rose 125 mm dia with 125mm long cp nipple of approved quality complete all as specified 45 s&f in repairs of wall mixture cp hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipeand plugging complete all as specified 46 s&f in repairs ofhealth faucet with stainless steelflexible pipe of 1.00 metrelength including holdercomplete all as specified 47 s&f in repairs of fancy type chromium plated two way bib cock of 15mm bore, screwed for iron pipe or brass ferrule etc complete all as specified 48 s& f in repairssheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf60mm wide with chromium plated bracket guard and railing 500mm long completeall as specified 49 s&f in repairsbevelled edge mirror of 5 to 6 mm thick selected quality glass of size 600 x 450 mm mounted on 6mm thickac building board or commercial plywood andfixed to wooden plug with chromium plated brass screw and cup washers complete complete all as specified 50 s & f in repairpvc body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete all as specified 51 s & f in repairplastic water closet seat cover white closed pattern with flat bottom and cover with mild steel / chromium plated or aluminised hinging device complete all as specified 52 s&f in repairpvctank cover for oht of 500 litrescapacity complete all as specified 53 s&f in repairs stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified 54 s & f in repairflush pipe of polyethylene of low or high density or pvc, 32mm dia for low level flushing cistern / basins complete as complete all as specified 55 s & f in repairldpe pipe 32mmbore fixed to wall / ceiling with bends / elbow complete all as specified. 56 supplying and laying of cpvc pipes 15mm sdr 11 & plain cpvc sdr 11 fittings on walls / ceiling or laying in floors including cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified. 57 s&f in repair stainles steel gratingsround type 100mm size ofminimumweight100 gmscomplete all as specified 58 s&fin repairpvc valveless, syphonic action type flushing cistern, low / high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified 59 s&f in repairurinal waste coupling ( brass ) 32mm complete all as specified 60 s&f in repairss waste coupling ( half / full thread ) 32mm complete all as specified 61 s&f in repairsinternal fitting ( including syphon, ball valve, lever, rubber cone etc ) for single flush cistern complete all as specified 62 s&f in repairspremium body 15 mm dia spindle for bib tap, angle valve, pillar tap etc complete all as specified 63 s&f in repair20mm boreball valve highpressure of ptmt with epoxy coated aluminium rod and high density plastic ball screwed for iron pipecomplete all as specified 64 s&f in repairrotational moulded polythylenewater storage tankof 500 litres capacity, double layered ( cylindrical / vertical with closte top ) hoisted and fixed in position all as specified in ssr part i including providing and fixing ptmt ball valve high pressure with polythene float and fly nut, 20mm bore complete 65 s&f in repairrotational moulded polythylenewater storage tankof 1000 litres capacity, double layered ( cylindrical / vertical with closte top ) hoisted and fixed in position all as specified in ssr part i including providing and fixing ptmt ball valve high pressure with polythene float and fly nut, 20mm bore complete 66 s&f in repairrotational moulded polythylenewater storage tankof 2000 litres capacity, double layered ( cylindrical / vertical with closte top ) hoisted and fixed in position all as specified in ssr part i including providing and fixing ptmt ball valve high pressure with polythene float and fly nut, 20mm bore complete 67 taking up or down steel tubing 15mm bore &connections and s&f gi tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floorscomplete all as specified 68 taking up or down steel tubing 20mm bore &connections and s&f gi tubing medium grade with all fittings & fixed complete to walls / ceiling or laid in floorscomplete all as specified 69 s&f in repair of gun metal gate valves 15 mm with lever arm screwd both ends for iron pipes complete all as specified 70 taking down shutters of any descriptionarea notexceeding 1.00 sqm all as specified 71 taking down shutters of any descriptionarea exceeding 1.00 sqm butnot exceeding 2.0 sqm all as specified 72 s&fanodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified 73 s&fanodised aluminium door shutters, aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified 74 s&fpvc door frames of sizes 50 x 47 mm made out of 5 mm prelam pvc sheet reinforced with ms square tube in opening of suitable size complete all as specified 75 s&f factory made ( prelam on both sides ) solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of ms tubes for top and bottom rails, ms frame shall covered with heat moulded prelam pvc c channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for styles and prelampvc sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam pvc sheet to be filled in the ms welded / sealed to the styles and rails with suitable pvc sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed. 76 taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 sqm but not exceeding 4 sqm each andall as specified 77 s&f 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. ( without sash bars ) , edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in ssr part – i, section – 8, clause 8.24 ( a ) ; supplied and fitted to chowkats all as specified 78 s&f second class hard woodshutters 35mm thick, plain framed panelled shutter factory made ( two panel ) with lock rail & panel of 9mm bwp commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and style as per is:1003 complete all as specified 79 s&f plain, solid, straight chowkhats and frames of secondclass hard wood wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified 80 s&f100mm long butt hinges medium weight cold rolled mild steel 81 s&f150 mm long aluminium anodizes barrel tower bolts of extruded section 82 s&f150 mm size aluminium anodized handle 83 s&f in repairs for 100mm long butt hinges medium weight cold rolled mild steel 84 s&f in repairs for 150 mm long aluminium anodizes barrel tower bolts of extruded section 85 s&f in repairs of mild steel pressed handles 150 mm, oval type, stove enamelled black 86 s&f in repair of mild steel door closer complete all as specified 87 s&f in repairsof aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified 88 s&f in repair of aluminium alloy, anodised, sliding door bolt of length 250mm with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete. 89 s&f in repair of mild steel sliding door bolts of length 300mm , plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 90 m&l for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified 91 s&f stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified 92 s&fin repair galvanised ms wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified 93 s&f figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 sqm in each pan complete all as specified 94 s&fin repairs sheet glass 3.0 mm thick ordinary quality and glazing with oil putty, in squares n. exc 0.5 sqmin each pane complete all as specified 95 dismantling wrought iron or mild steel work of any description as provided for roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing ( beam, tee, angle, channel or flat sections ) complete all as specified 96 s&fmild steel work asin tubular trusses including special shaped washer etc. complete using erw or induction butt welded tubes conforming to i. s.1161 1979 grade st. 240 complete all as specified 97 dismantling asbestos cement ( corrugated, semicorrugated, etc. ) sheets in roof coverings complete all as specified 98 s&fpre painted galvatume aluminum zinc coating gi based profile pattern steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as inroof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified 99 dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified 100 s&f mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete, confirming to fe 410 gde e 250 quality a complete all as specified 101 s&f in repairfactory made steel window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified. 102 s&f in repairsteel ventilator fixed type with glazing bar complete all as specified 103 m&l for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girthover a coat of red oxide primer includingpreparation of surfaces complete all as specified 104 s&f in repairdrapory / curtain rod 20 to 25mm dia of stainless steel fixed with fancy type matching pair of bracket not less than 75 grams each fixed with screw . 105 s&f in repair 110mm bore of pvc ( swr ) pipes single socketed in any length with rubber ring joints laid on wall / floor with clipcomplete all as specified 106 s&f in repair75mm bore of pvc ( swr ) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified 107 s&f pvc ( swr ) bends any radius bore of 110 mm all as specified 108 s&f pvc ( swr ) bends any radius bore of 75 mm all as specified 109 s&f in repair of pvc ( swr ) branch piece, single ( single y ) equal or unequal of bore 75mm all as specified 110 s&f in repair of pvc ( swr ) branch piece, single ( single y ) equal or unequal of bore 110 mm all as specified 111 s&f in repair ofpvc ( swr ) junction single, ( single t ) equal or unequal of bore 75mm all as specified 112 s&f in repair ofpvc ( swr ) junction single, ( single t ) equal or unequal of bore 110 mm all as specified 113 s&f in repair of pvc ( swr ) floor trap, plain with grating including jointing with solvent cement all as specified 114 s&f in repair of pvc ( swr ) gully trap 125 / 110 mm, setting and jointing with solvent cement all as specified 115 s&f in repair of flush pipes to pedestal pan, including all joints all as specified 116 s&f in repair of flush pipes to squatt pattern closet including all joints and making good to the floor all as specified 117 s&f in repair cones, india rubber nozzles of wcpan all as specified 118 m&l for cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 litres capacitycomplete all as specified. 119 s&f in repair18 / 19mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame workinculding 6 mm thick teak wood lippingedging on all sides complete all as specified 120 m&l for welding in repairs not exceeding 2.5 cm in length, to the metal not exceeding 6mm thick complete all as specified 121 m&l for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10 cm inwidth or girth and evenly applying one coat ofsynthetic enamel paint completeall as specified 122 m & l for preparation of old painted steel and iron based surfaces of any description, not otherwise described over 10 cminwidth or girth and evenly applying one coat on synthetic enamel paint completeall as specified 123 taking down existing aluminium door shutters ofsizeexceeding 2.0 sqm but not exceeding 4.0sqm each and carry out minor repairs with & including replacement of minor fittings , hinges, rubber beading, etc including replacing of broken wire mesh and glass panes as required and refixing the shutter in the same opening after repairing complete all as specified and directed. note:wire mesh and glass as requiredshall be measured and paid separately under relevant items. 124 taking down existing aluminium window shutters ofsizenot exceeding 2.0 sqmeach and carry out minor repairs with & including replacement of minor fittings , hinges, rubber beading, etc including replacing of broken wire mesh and glass panes as required and refixing the shutter in the same opening after repairing complete all as specified and directed. note:wire mesh and glass as requiredshall be measured and paid separately under relevant items. 125 dismantling of wallandceilingboards ( fibre, pulp, insulation, etc. ) or insulationboards / slabs / blankets, any thickness, including cover fillet complete. 126 s&fanodised aluminium snap grid of size 605mm x 605mm , frame work for false ceiling with hangers 6 mm dia. g.i. ( upto 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of g.i. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. 127 s&fexposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified.note: frame work for ceiling shall be measured and paid separately under relevant item 128 m&l for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting. 129 m&l for preparation of old surfaces and applying one coats of wooden varnish over a coat of wood filler to prepared surfaces complete all as specified 130 m&l for preparation of old decorated plastered or unplastered surfaces and evenly applying one coat of white wash on surfaces of walls etc complete all as specified 131 m&l for complete removal of existing treatment on walls and evenly applying two coats of white wash on surfaces of walls etc complete all as specified 132 m&l for complete removal of existing treatment from ceilingand evenly applying two coats of white wash on surfaces of walls etc complete all as specified 133 m&l for complete removal of existing treatment on walls and evenly applying three coat of white wash on surfaces of ceiling complete all as specified 134 m&l for complete removal of existing treatment and evenly applying one coat of cement based paint with roller over a coat of primer complete all as specified 135 m&l for washing rubbing down and stopping distempered surfaces of walls etc and evenly applying two coats of oil bound distemper with roller all as specified 136 m&l for complete removal of existing treatment on walls and evenly applying two coats of oil bound distemper with roller over a coat of putty all as specified 137 m&l for applying two coats of 100% premium arcylic emulsion paint having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali & fungal resistance , dirt resistance exterior paint of required shade ( company depot tint ) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm make : asian apex, burger weather coat antidust, nerolac excel, dulax weather shield. note ( a ) primer and emulsion paintingshall be carried out through air less sprayingmachine ( mechanical process ) . 2. wall care putty ( if required at site beforeapplication of above painting in certain portion ) shallbe done and same shall be measured and paid seperately under relevant item...

West Central Railway - Madhya Pradesh

37100722 tender for aden w ) bhopal white wash, colour wash and distempering zone for all residential and service buildings as per ussor 2011, costing upto rs. 5.00 lakh each under sse / w / rkmp and sse / works / bpl for the year 2023 24 ( rkmp and bpl zone ) ...

Central Reserve Police Force - Madhya Pradesh

36359714 providing and applying of external and internal painting with white wash/distempering of type iii quarter 16 nos one block providing and applying of external and internal painting with white wash/distempering of type iii quarter 16 nos one block at ciat school crpf, a.b. road, shivpuri m.p. under annual repair and maintenance civil...

Military Engineer Services - Madhya Pradesh

35888640 tender for repair to e / m installation at dronachal bhopal. demolition of cement concrete (un reinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) completed all as specified and directed. 2 m&l for 100 mm thick pcc 1:3:6 type c2 (using 40 mm graded stone aggregate) as sub base floor completed all as specified and directed. 3 m & l for sand filling under floors or in fdn including watering and consolidation as in bedding layers for laying tiles completed all as specified and directed. 4 m&l for factory made machine pressed precast concrete interlocking paver blocks any shape and size confriming to is 15658 2006 of 60mm thickness coloured chemically treated pcc (isi marked ) m 35 grade of desgin & pattern approved by ge as in footpath and filling of joints with narmada fine sand complete all speciified and directed. 5 m & l machanic pressed precast concrete interlocking paver block any shape and 80mm thickness, jointed and pointed with grey cement and pigment in floor/ footpath completed all as specified and directed. 6 m&l pcc 1:2:4 type b 0 (using12.5mm graded crushed stone aggregate) as incoping including weathering, slightly rounded or chamfered angles and throating, as directed and necessary form work complete all as specified and directed. 7 dismantling of stone slabs and tiles of any description or thickness in floor, aprons etc laid dry or laid and pointed in floor/ footpath complete all speciified and directed. 8 labour for except tiles machine pressed precast concrete interlocking paver blocks any shape and size of 60mm thickness coloured of desgin & pattern refixing in floor/footpath and filling of joints with narmada fine sand complete all speciified and directed. 9 dismantling of existing rcc/ steel /wooden posts or struts (wood, steel or r.c.c.) any section,concrete ,brick work ,massonery etc .including taking out embedded portion and making good disturbed ground complete all speciified and directed 10 dismantling wrought iron or mild steel work of any description not otherwise provided for completed all as specified and directed. 11 dismantling fencing wire mesh, any type. 12 m & l excavating in post holes (or similar holes) each n exc 0.5 cum , getting out , returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering , and removing surplus soil to a distance n exc 50 m and making good surfaces in hard/dense soil completed all as specified and directed. 13 m&l pcc 1:3:6 (type c2) (using 40 mm graded stone aggregate) as in foundation filling and massconcrete completed all as specified and directed. 14 s&f post and strut in fencing including cutting tops to shape as directed drilling holes notching for wire flat iron fillet ( for securing wire mesh) in incl all necessary drilling bolting,screwing and rivetting conforming to fe 290gd 165 completed all as specified and directed. 15 supply only mild steel screw bolt ( maching made) with hexagonal or square head at one end and screwedthe other with washer n.exc 5 cm long dia bolt 5 to 10mm completed all as specified and directed. 16 m&l for ms round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all speciified and directed 17 supply only chain link ms galvanisd fencing, any size or type complete all as specified and directed. 18 fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. 19 s&f, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire completed all as specified and directed. 20 m&l preparation of new steel surface of any description over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 21 m & l for two coat of synthetic enamelpaint over priming with red oxide zinc on new or prevously untreated surface of any description not exc 10 cm in width or girth when unconnected with other painting or painted in different tint completed all as specified and directed. 22 m&l preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. 23 dismantling structural steel work including doors, gates and framed truss etc completed all as specified and directed. 24 m&lmild steelframed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing with welding all are as complete confirming to fe410 s completed all as specified and directed. 25 demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillers etc. butexcluding ashlar facings, dressed stone work and precast conc rete articles completed all as specified and directed. 26 demolition of pcc of any description and in any position not otherwise specifically provided for complete all as specified and directed 27 demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed 28 m&l pcc 1:3:6 (type c2) (using 40 mm graded stone aggregate) as in foundation filling and massconcrete 29 m&l forbrick work withfly ash modular bricks ,straight or curvedon plan exc 6 m meanradius built in cement mortar1:6 complete all as specified and directed. 30 m&l for walling of random rubble uncoursed well bounded, bedded, and solidly hearted, builted in cement mortar 1:6 complete all as specified and directed 31 description all as per item no 30 above but except stones complete all as specified and as directed. note: old stone obtained from demolition shall be used under this item. 32 m&l forproviding precast cement concrete type b11:2:4 (20mm graded aggregate)asin cover slabs (for manholes, drains etc.) of any size and thicknessas requiredset in cement mortar 1:4 note : reinforcement will be measured and paid saperately 33 m&l mild steel tmt bars 10 mm dia and over cut to length bent to sharp required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) but less than 0.9 mm dia securing with clips completed all as specified and directed. 34 m&l for rendering 15mm thick cement plaster in cm 1:4 and even on fair faces ofbrick or concrete surfaces finished even & smooth without using extra cement completed all as specified and directed. 35 m&l flush pointing to random rubble, uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed. 36 m&l for preparation of old decorated surfaces of wall including brooming , scraping down. smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling completeall as specified and directed. 37 mateirial & labour for preparation of old decorated surfaces on walls including brooming , scraping down. smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls completeall as specified and directed. 38 m&l for complete removal of existing treatement on walls and applying two coats of cement base paint over a coat or alkali resistan primer completed all as specified and directed. 39 taking down cement plaster of any description including raking outjoints, hackisng for key, scrubbing down with water etc completed all as specified and directed. 40 material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfacesfinishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applyingtwo coat of oil bound distemperover& inculdinga coat of white cement base puttycompeletall as specified and directed. 41 ditto all as per srl item no.40 here in before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound for wall, chajja, fins, sides including preparation of newly plastered surfaces of walls complete. note: supply only of wpc shall be measured and paid separately. 42 material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash completed all as specified and directed. 43 supply only integral water proofing compound 44 repair to rolling shutters of size n. exc 10 sqm each, manual/gear operative type, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing , oiling to make the system smooth/easy functional, including new nuts & bolts and greasing of gear box by removing old/rusted nuts bolts, giving proper tension to the spring, necessary welding & taking down shutter wherever required and fixing of hold fast/clamp and making good matching to existing wall surface complete all as directed(new fittings except mentioned parts will be measured and paid saperately) 45 s & f in repair cover hood of 1mm thick ms sheet matching to existing shape complete all as specified and directed. 46 s & f in repair rolling shutter lath 1mm thick ms sheet matching to existing complete all as specified and directed. 47 s & f in repair ms bracket plate to the side of cover hood made of 6mm to 8mm platecomplete all as specified and directed. 48 taking down existing unserviceable treatment of any description including cement plaster, any thickness from roof surfaces, cleaning of roof surfaces and preparing it for further treatment and removing rubbish from the site up to 50 mtrs complete all as specified and directed 49 m&l for 25mm thick pcc 1:2:4 type b0 (using 12.5mm graded stone aggregate) as in levelled course finish even and fair for tile finishes specified and directed 50 m&l for brushing neat cement slurry with 3.0 kg of cement per square metre complete all as specified and directed. 51 m & l 15mm thick rendering in cm 1:3 mixed withwater proofing compound over rcc roof slab finished even and smooth without extra cement complete all as specified and directed. note : wpc will be measured and paid separately 52 m&l for applying one coat of bonding material using blown type bitumen conforming to is 702 grade 85/25 @ 1.20 kg/sqm l over a coat of bitumen primer on finished plastered surfaces complete all as specified and directed. 53 m&lfor app based polymeric membrane minimum weighing 3kg/sqm and min 3mm thick reinforced with polyster non wove fabic (wt not less than 150 gms/sqm) including priming of surfaces by forced application complete all as specified and directed ...

Military Engineer Services - Madhya Pradesh

35867543 tender for certain repair to joinery and other misc work under age br ii ge gwalior taking down chowkhat or frame ( without taking off shutter from the frame ) not exceeding 1.5 square metre each , removing from the site cutting holes exc 150 sq.cm but n.exc 400 sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type b l as required complete all as specified and as directed. 2 taking down chowkhat or frame ( without taking off shutter from the frame ) exceeding 1.5 square metre eachnot exc. 4.00 sqm, removing from the site cutting holes exc 150 sq.cm but n.exc 400 sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type b l as required complete all as specified and as directed. 3 taking down shutter of any description not exceeding1.00 sqm each complete all as specified and directed. 4 taking down shutter of any description exceeding1.00 sqm but not exceeding 2 sqm each complete all as specified and directed. 5 m & l for 35 mm thick glazed and skeleton factory made shutters of 2nd class hard wood, open rebated and prepare to reveive glass, guage etc ( without sash bars ) edges of framing plain chamfered or rounded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified complete all as specified and directed. 6 s&f 30mm thick flush shutters , soild coreconstruction , with paticle board core and plywood face panels , commercial type complete all as specified and directed. 7 s&f solid pvc door frame of size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced with ms square tube, complete all as specified and directed. 8 s&f factory made solid panel pvc door shutter 30 mm thick ( style ) consisting of frame made out of ms tubes for top & bottom rails, ms frame shall be covered with heat molded plain colour pvc ‘c’ channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour pvc sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rai ; panelling of plain colourpvc sheet 5 mm thickness to be fitted in ms frame welded / sealed to the style and rails with suitable pvc sheet beading and joinedtogether with solvent cement complete all as specified and directed. 9 m&l preperation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer onnew wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and directed. 10 s&f 100 mm long size aluminium alloy anodisedhinges medium weightcomplete all as specified and directed by engr in charge. 11 s&f 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed. 12 s&f aluminum handles cast type, anodized of 150 mm size complete all as specified and directed. 13 s&f butt hinges 100mm long medium weight, cold rolled mild steel. 14 s&f aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 15 m & l forpowder coated ( minimum thickness of powder coating 50 micron ) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 16 m & l forpowder coated ( minimum thickness of powder coating 50 micron ) aluminiumwindow and ventilator ( adequate track ( sliding openable ) ) without sash, aluminium section weighing 0.25 kg / m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coatedaluminum snap beading, screws etc. complete all as specified and directed note : panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. 17 m & l forpowder coated ( minimum thickness of powder coating 50 micron ) aluminium door shutters of aluminium section weighing 0.55 kg / m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 nos, 3 nos powder coated aluminium hinges heavy duty and 02 nos 150mm long powder coated aluminium tower bolts in each door shutter withpowder coatedaluminum snap beading, screws etc. complete all as specified and directed note : panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately. 18 s&f 4.8 mm thick tinted glassof selected qualityin square not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed 19 s&f 4.8 mm thick tinted glassof selected qualityin squareexceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingcomplete all as specified and directed 20 s &f for door closer hydraulically regulated, designation no. 3, universal type, aluminium die cast body ( isi marked ) , suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed 21 s & f of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed 22 s&f 3mm thick, ordinary glass pin head type and glazing with oil putty, silicone or wooden beads, in square not exceeding0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden / steel frame / stone, concrete or brick surrounds complete all as specified and directed. 23 s&f in repair galvanised wire cloth, .36mm nominal dia of wire and average width of aperture 1.18mmand fixed with tinned tacks or galvanisedstaples complete all as specified and directed 24 s&f 4.8 mm thick in repair tinted glassof selected qualityin square not exceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingincluding hacking out old broken glass of any thickness and any description from wooden / steel frame / stone, concrete or brick surrounds complete all as specified and directed.complete all as specified and directed 25 s&f 4.8 mm thick tinted glass in repairof selected qualityin squareexceeding 0.5 sqm in each pane, fixed to aluminumframe with and including suitablerubber beadingincluding hacking out old broken glass of any thickness and any description from wooden / steel frame / stone, concrete or brick surrounds complete all as specified and directed. 26 s & f factory made steel windows with side hung glazed window including projecting type hinges with steel handles and steel peg stays , complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. 27 s & f factory made steel windows with side hung glazed window including projecting type hinges with steel handles and steel peg stays , complete withoutglazing bars, dovetailed or welded complete all as specified and directed. 28 s & f factory made steelvetilatorwith tophung glazed shutters, including projecting type hinges, with steel handles and steel peg stays , complete with glazing bars, complete all as specified and directed 29 s&ffactory made steel ventilatorwith tophung glazed ventilatorincluding projecting type hinges with steel handle and steel peg stay complete witout glazing bar , dovetailed or welded complete all as specified and directed. 30 s&f for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to fe 290e 165 , complete all as specified and directed. 31 s&f 3mm thick, ordinary glass pin head type and glazing with oil putty, silicone or wooden beads, in square not exceeding0.5 sqm in each panecomplete all as specified and directed. 32 s&f galvanised wire cloth, .36mm nominal dia of wire and average width of aperture 1.18mmand fixed with tinned tacks or galvanisedstaples complete all as specified and directed 33 m&l for applying two coat of synthetic enamel paint as one coatincluding preparation of new steel surfaceover 10 cm width or girth comlete all as specified and directed . 34 repair and mending of leakage in 15mm bib tap, pillar tap, stop cock, angle stop cock etc of any description includig replacement of internal fitting of requisite pattern and sizecomplete all as specified and directed 35 repair and mending of leakage in wall mixer, wash basin mixer and sink mixer etc of any description includig replacement of internal fitting of requisite pattern and size complete all as specified and directed 36 s&f in repairs small galvanised iron fittings such as socket, elbow, nipple, tee, union etc for 15mm bore pipe complete all as specified and directed 37 s&f in repairs small galvanised iron fittingssuch as socket, elbow, nipple, tee, union etc for 20mm bore pipe or 15x20mm reducers complete all as specified and directed 38 s&f in repairs 32mm dia ribbed pvc waste drain pipe for whb, urinal etc, strached length 90cm with pvc coupling socket complete all as specified and directed 39 s&f in repairs 40mm dia ribbed pvc waste drain pipe for sink, strached length 90cm with pvc coupling socket complete all as specified and directed 40 s&f in repairs internal fitting ( pvc syphon kit ) with handle complete for low level pvc flushing cistern complete all as specified and directed 41 opening of air lock / blockage in gi pipe line from service water tank to internal gi pipes / fittings for smooth flow of water to bib taps / showers / pillar tap / stop valves complete by application of pressure pump / gravity pressure complete all as specified and directed 42 resecuring, easing or adjusting without taking down door / windows shutters not exceeding 1 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws. 43 resecuring, easing or adjusting without taking down door / windows shutters exceeding 1 sqm but not exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws complete all as specified and directed 44 resecuring, easing or adjusting without taking down door / windows shutters exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws complete all as specified and directed 45 taking down and refixing of shutter of any description note : refixing incl taking down easing and adjusting and also refxing builders hardware as reqd incl removal of unserviceable screws etc.hardware items will be paid at supply only rates except screws and nails not exceeding 1 sqm each 46 ditto item above exceeding 1 sqm n.exc 2 sqm each complete all as specified and directed 47 ditto item above exceeding 2 sqm each complete all as specified and directed 48 supply only 150 mm long aluminium anozied barrel tower bolt of extruded section complete all as specified and directed 49 all as per item no. 48 above but 250mm longaluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed 50 all as per item no. 48 above but 125 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed 51 all as per item no. 48 above but 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed 52 all as per item no. 48 above but 150mm long mild extruded aluminium handles fabricated type complete all as specified and directed 53 all as per item no. 48 above but 100mm long aluminium handles, cast type, anodised complete all as specified and directed 54 all as per item no. 48 above but. 30mm width of flaps ( when open ) continuous ( piano ) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed 55 s & f in repairs mild steel drawers or almira handles, projections drop ( 50mm to 65mm ) on screwed plate complete all as specified and directed 56 s & f in repair 150 mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed 57 s & f sintex water tank cover ( dhakkan ) tied with wire for 500or 1000 ltrcapacitywater storage tank complete all as specified and directed 58 s & f in repairs peg stays to steel windows / ventilator complete all as specified and directed 59 s & f in repair handles to steel windows / ventilator complete all as specified and directed 60 demolition of brick work / stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. 61 m&l for brick work with sub class b bricks straight or curved on plan exc. 6m mean radius built in cement mortar ( 1:6 ) .complete all as specified and as directed. 62 m& l for brick work with sub class `b bricks, straight or curved on planto anyradius, in half brick workbuilt in cement mortar 1:4 complete all as specified and as directed. 63 taking downcement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc.complete. 64 m&l for 15 mm thick rendering in cement mortar ( 1:6 ) on brick / concrete / stone surfaces finished even and smooth without using extra cementcomplete all as specified and as directed. 65 m&l for 15 mm thick rendering in cement mortar ( 1:4 ) on brick / concrete / stone surfaces finished even and smooth without using extra cementcomplete all as specified and as directed. 66 m&l for rendering 5 mm thick in cement mortar ( 1:3 ) on ceiling finished even and smooth without using extra cement complete all as specified and directed. 67 m&l for preparation of the newly plastered surfacesof wall & applying3 coats of white wash on wall surfaces complete all as specified and directed. 68 m & l for two coat of oil bound emulsion paint over a coat of birla wall care putty on plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed. 69 m&l for preparation of the newly plastered surfacesof ceiling & applying3 coats of white wash on ceiling surfaces complete all as specified and directed. 70 m&l for applying one coat of synthetic enamel paintincluding preparation of old painted wooden surface any description not otherwise described over 10 cm width or girth and all as specified and directed . 71 m&l for applying one coat of synthetic enamel paint as one coat including preparation of old steel surfaceover not otherwisedescribed over 10 cm width or girthall as specified and directed . 72 taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified and directed. 73 taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified and directed. 74 taking up or down steel tubing and connection including cleaning for refixing or removing to store of 25mm bore of pipe, complete all as specified and directed. 75 supply and laying 20 mm dia .of bore cpvc pipe sdr11 and plain cpvc sdr11 fittings ( isi ) marked , concealed or fixed to wall or laid in floors complete all as specified and as directed 76 supply and laying 25 mm dia .of bore cpvc pipe sdr11 and plain cpvc sdr11 fittings ( isi ) marked , concealed or fixed to wallor laid in floors complete all as specified and as directed 77 s & f 20 mm dia steel tubing and connectiongalvanized with all fittings medium grade tube in floors, walls and ceiling concealed or fixed to wallor laid in floors complete all as specified and as directed 78 s & f 25mm dia steel tubing and connectiongalvanized with all fittings medium grade tube in floors, walls and ceiling concealed or fixed to wallor laid in floors complete all as specified and as directed 79 taking down eaves gutters and rain water pipes ( any size 75mm to 110mm of any pattern ) , of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., ( measured overall as fixed along the centre line over fittings and accessories ) complete all as specified. 80 s&f for 110mm dia pvc ( swr ) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all specified. 81 s&f for 75 / 90mm dia pvc ( swr ) pipes single socketed, in any length with rubber ring joints, fixed to walls. complete all as specified . 82 s&f for 75 mm dia pvc ( swr ) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified . 83 s&f for 110mm dia pvc ( swr ) pipes bends any radious complete all as specified and directed. 84 s&f for 75 mm dia pvc ( swr ) pipes bends any radious. complete, complete all as specified and directed. 85 s&f for 110mm dia pvc ( swr ) pipes bends with access door any radious complete all as specified and directed. 86 s&f for 75 mm dia pvc ( swr ) pipes bends with access door any radious. complete, complete all as specified and directed. 87 s&f for 110mm dia pvc ( swr ) pipes junction, single ( single t / y ) equal or unequal any radious.with acces door, complete all as specified and directed. 88 s&f for 110mm dia pvc ( swr ) vent cowl, complete all as specified and directed. 89 m&l for 75 mm dia of out letpvc ( swr ) floor trap plain withcp grating including jointing with solvent cement as in repair complete all specified. 90 s&f for in repairs15mm, pillar taps fancy type long body chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads, scewed down high pressure, with or without lettered hot or cold with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified . 91 s&f for in repairs 15mm angle cock chromium plated, cast copper alloy, with brass ceramic disc spindleand capston heads, scewed down high pressure, with or without lettered hot or cold with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified . 92 s&f for 15mm , bib tapfancy type long body chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads, scewed down high pressure, with or without lettered hot or cold with long srewed shanks and flynuts, srewedfor iron pipe fixed in repair and complete all as specified 93 s&f for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixedin repairs, complete all as specified and directed. 94 s&f for in repairs for 15 mm stop valve cast copper alloy screwed down high pressure with capston head handle chromium plated with long shank and cup ( concealed type ) screwed both ends for iron pipe 15mm bore or for unionscomplete all as specified and directed. 95 s&f for in repairs brass cp whb mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified. 96 s&f for in repairsheatth faucet with one meter pvc flexible bodypipe of cpincluding fixing bracket, complete all as specified and directed. 97 s&fin repairs for wall mixer with two in one pattern in of brass cp, complete all as specified and directed. 98 s&f for in repairs soap dish of cp fixed with pvc rawal plugs and screw, complete all as specified and directed. 99 s&f for in repair cp tubular towel rail d type 20mm dia and 60cm long complete all as specified and directed. 100 s&f for peg set of six s.s.fixed to wall with pvc plugs and screw, complete all as specified and directed. 101 supply only15mm dia pvc connection with ptmt nuts of length 450 mm, complete all as specified and directed. 102 s&f in repair flushing jet spray ( chromium plated ) for padestral pattern ewc including 1.00 metre tube flexible pipe and brass chromium plated nutscompleted all as specfied and directed 103 s&f in repair 2 way chromium plated angle cockwith flange complete all as specified and directed 104 s&f for in repairs mild steel chromium plated grating 100 mm dia, fixed in repair, complete all as specified and directed. 105 s & f in repair rotational moulded poly ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity, triplr layer in construction white in colour hoisted and fixed in positioncomplete all as specified and directed. 106 s & f in repair rotational moulded poly ethylene multilayer water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity, triplr layer in construction white in colour hoisted and fixed in positioncomplete all as specified and directed. 107 s&f for 20mm ball valves high pressure of ptmt with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. ( minimum weight 15mm 142gms / 20 m m 210 gms / 25mm 455gms / 40mm 690 gms ) complete all as specified and directed. 108 s&f for as in repair 20 mm ball valves high pressure of ptmt with epoxy coated aluminiumrod& highdensity plastic ball screwed for iron pipe and fixed 20mm dia of pipe . ( minimum weight 15mm 142gms / 20mm 210gms. / 25mm 455gms / 40mm 690 gms ) complete all as specified and directed. 109 s&f for in repair gun metal globe / valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed. 110 s&f for in repair gun metal globe / valve with iron wheel head screwed both ends for iron pipe of 25mm bore, complete all as specified and directed. 111 s&f in repair sinks with drainage board madeout of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 915 mm x 460 mm with bowl size410 mmx 330 mm x 160 mm complete all as specified and directed . 112 s & f in repair for plate rack made out of stainless steelof wire type / sheet patternsize nad type as directed by engineer in charge and approved by ge fixed to wall with necessary fitting arrangement complete all as specified and directed. 113 s&f for sinks madeout of stainless steel 0.90 mm thick kitchen or laboratory with ;plugs, washers, and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, and connecting union to pipe overall size 495 mm x 420 mm with bowl size410 mmx 330 mm x 160 mm complete all as specified and directed fixed in repair. 114 s&f 5mm thick, 600mm wide rounded edge mirror of selected quality glass, with back polishig mounted and fixed with stainless steel decorativecap wahsers and screws set fixed on pvc rawl plugs complete all as specified and directed. 115 s&f for as in repairviterous china wash down water closet pan ( pedestal pattern ) white excluding fixing bolts, flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe etc and mild steel chromium plated or aluminised hinges device & on cp jet complete all as specified and directed. 116 s&f in reapir plastic water closet seat covered white coloured closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devise complete all as specified and directed. 117 m&l for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest ( excluding flushing cistern ) including vitreous china ‘p’ or ‘s’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor, complete all as specified and directed. 118 s&f for in repairsofvitreous china wash basin, white, flat back, / oval type size 500 x 400mm including waste coupling , waste pipe and labour for fixing pillar tap , pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . note : pillar tap andpvc connection will be measured paid separetly. 119 s&f for in repair pvc valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. 120 dismantling boarding any description fixed with nails in any position ( including cup board shutter / shelve upto 25mm thick ) complete. 121 s&f for 18 mm thickpvc celuka ply of both side prelaminated and other side plain white colour fixed with screws , solvent cement / adehesivecomplete all as specified . 122 s&f for 12 mm thickpvc celuka ply of both side prelaminated and other side plain white colour fixed with screws , solvent cement / adehesivecomplete all as specified . 123 s&f for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed. 124 s&f for continuous ( piano ) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm ( when open ) , complete all as specified and directed. 125 s&f for extruded aluminium alloy handle of 100 mm size fabricatedtype, anodised.complete all as specified . 126 s&f for haps and staple safety type aluminium anodised with ms hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified . 127 s&f for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. 128 s&f 25mm dia stainless steelcurtain rod not less than 0.80mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length ) & end knobs complete all as specified and directed by engr in charge 129 dismantiling of stone slabs and tiles ( kota stone etc. ) of any discription or any thickness in floors, aprons, skirting, dado etc.laid bedded and pointed in any mortar complete all as specified and directed. 130 dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding ( but not backing ) complete all as specified and directed. 131 demolition of concrete of any description and in position not otherwise specially provided for complete all as secified and directed. 132 m&l for non skid ceramic tiles, joint free, coloured tiles7mm to 8 mm thick ( square or rectangular ) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set over and including 15 mm thick cement screed in ( 1:4 ) cm set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. 133 m&l for ceramic tiles, joint free, coloured tiles 7mm to 8 mmmm thick as in skirtingfixed over and including 10 mm thick cement screed in ( 1:3 ) cm set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.with the colour of tiles complete all as specified and directed. 134 m&l for digital glazed ceramic tiles, coloured tiles 300mm x 450mm x 7mm thickon vertical faces ie. as in skirting / dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar ( 1:3 ) completeall as specified and directed. 135 m&l for non skidceramic coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar ( 1:6 ) complete all as specified and directed. 136 m&l granite slab18 mm to 20 mm thick machine cut, bedded and joined withcementand pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bedcm ( 1:3 ) .the shade of granite stone including cutting and polishing type as incill and jamb / skirting, steps cooking plateformsincludigng rounding off the exposed edges and polishing all asspecified and directed.. 137 m&l for 75mm thick pcc ( 1:2:4 ) type c2using 40mm graded stone agg as in plinth protection surface even and fair without using extra cement including forming & filling expensionjoints 65 mm deep x 10 mm wide complete all as specified and as diected 138 m&l for pcc type d2 ( 1:4:8 ) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed. 139 m & l pcc ( 1:2:4 ) type bo using 12.5 mm graded stone aggregate as levelling course / mass concrete complete all as specified and directed. 140 s&f for machine pressed precastcoloured concrete tile with grey cement and no pigments. ( rubber mould casted glossy finish ) size 300x300mm of 25mm thick over 20mm thick cm ( 1:6 ) screed bed complete all as specified and directed 141 material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of m 35 grade with aproved colour, design & attern as in foothpath, parks, lawns, drive ways or light traffic arking etc. of required strenght, thickness & size / shape, made by table vibrating method using pu mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement complete all as specified and directed. 142 m&l for cement concrete ( 1:2:4 ) type b 1 ( 20mm graded agrregate ) in lintels upto 1.5m clear span, cills, stes, seimic and other similar bands, plinth course, string course, lacing cours, arapets and railingsupto 60cm in height, coping, kneelers, apex stones, bed plates, kerbs, water througs and the like including wheathering slightly rounded or chamfered angle and throating complete all as specified and directed. 143 dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed....

Military Engineer Services - Madhya Pradesh

35563767 special repair to building no p 50 bls at afs amla , taking down, cement plaster of any description from brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc and disposing of the rubbish materials in low lying areas of defence land all as specified and as directed. , demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and as directed. , m&l for brickwork with fly ash ,subclass ‘b’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6all as specified and as directed. , m&l 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:4 finished fair andevenwithout using extra cement complete all as specified and as directed. , m & l for 10 mm thick rendering in 1:6 cm on wall of fair faces brick & concrete surfaces finished even and smooth without using extra cement complete all as specified. , m&l for 1 to 2mm thick wall care putty on wall surfaces smooth finish complete all as specified and directed by engineer in charge , m & l 5mm thick rendering in 1:3 cm on ceiling, rcc facia and chajjas of fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as spd and directed. , m&l for preparing new surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed. , m&l two coats of oil bound distemper on wall newly plasterd surfaces over a coat of alkali resistant primer complete includingprepatation of new surfaces complete all as specified and directed. , m&l three coats of white washon newly surface on ceiling including all preparation complete all as specified & directed , material & labour for cleaning of roof surfaces and applying a coat of oil base bituminous primer @ 0.30 lit per sqm over andincluding 15mm thick cement plaster in cm 1:4 mix with liquid water proofing admixture@200ml per bag of cement including laying of app based polymeric membrane weighing not less than 3.00 kg/ sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt,not less than 150gms/sq. m) land on primed surface by tension application with 100mm over lap travers and 150mm over lap longitunaland finishing the top surface by applying two coat of aluminium paint @ 0.1kg/sqm on each coat including taking down old treatment complete all as specified and directed. , supply only liquid water proofing chemical all as specified and as directed , dismantling of wall, display board/ceiling board fiber, pulp insulation etc., or insulation board/slab/wool of any thickness including cover fillets complete all as specified and directed by engineer in charge. , s & f size of grid 605 x 605mm anodised aluminium snap grid frame work for false ceiling with hangers 6 mm dia. g.i. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of g.i. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by engineer in charge. , m & l for 4mm non asbestos fiber cement building boards fixed in cement ceiling flat or sloping to gi/aluminium framework with screws complete all as specified and directed by engineer in charge. , taking down chowkat or frames,area exc 1.5 sqm but not exc 4 sqm each with shutter (without taking off shutters from the frames)complete all as specified and directed . , taking down chowkhats or frames, area not exc 1.5 sqm with shutters (without taking off shutters from the frames)complete all as specified and directed , powder coated aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by engineer in charge. , providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of epdm rubber/ neoprene gasket required (fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is: 733 and is:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, c.p. brass/ stainless steel screws all complete all as specified and directed by engineer in charge. , s&f 5.5 mm thick sheet glass, selected quality and glazing with oil putty in squares n exc 0.5 sq. m in each pane of aluminium door/window complete all as specified and directed by engineer in charge , m & l 12mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed in aluminium frame with necessary beading complete all as specified and directed by engineer in charge. , s & f double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by engineer in charge. , s & f floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed by engineer in charge. , s & f 4 lever aluminium mortice lock, vertical type, size 100 mm complete all as specified and directed by engineer in charge. , s&f 100mm size aluminium anodized butt hinges complete all as specified and directed by engineer in charge. , s&f 75mm size aluminium anodized butt hinges complete all as specified and directed by engineer in charge. , s & f for 200mm long barrel tower bolt aluminium anodized with staples and bolt of extruded section complete all as specified and as directed. , s&f 150mm long size extruded aluminium alloy handles, cast type anodised complete as specified. , s& f 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified , s&f 100mm long size extruded aluminium alloy handles, cast type anodised complete as specified. , s&f door closer hydraulically regulated designation no.2 universal type,suitable for door shutters of 701 to 850 mm width and of wt 36 to 60 kg. aluminium (die cast) complete all as specified & directed. , dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by engineer in charge. , m&l for joint free non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match set,over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed. , m&l for non skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in coloured cement to match of lighter shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed. , ditto all as per item no. 34 but in vertical surfaces, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete of item all as directed. , material & labour for light shade vitrified ceramic tiles 10 mmthick (square /rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed. , ditto all as per item no 36 but in vertical surface as in skirting, set and jointed in neat cement, slurry & pointed in coloured cement to match the shade of tiles over and including 10mm thick rendering or backing coat in cement mortar 1:4 complete all as specified and directed by engineer in charge. , m&l for digital glazed ceramic tiles in vertical surfaces 450 x 300 x 7 mm thick,etc set and jointed in neat cement slurry and pointedin coloured cementto match the shade of tiles including 10mm thick backing coat in 1:4 cement mortor complete all as specified and directed. , m & l for coloured glossy heavy duty endura flooring tiles of size 30cm x 30cm x 10 mm set with grey cement and no pigment, jointed ad pointed in neat cement slurry in floors over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed by engineer in charge. , supply & fixing in repair vitreous china squatting pan, orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) complete all as specified and directed. , s&f in repair vitreous china wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified and directed. , s&f pvc(swr) 110mm dia s trap including connecting to out let with solvent cement complete all as specified and directed. , m & l in repairs for pvc nahani trap, plain with grating including jointing to waste pipe fixed in cement concrete type b 1 (1:2:4) with solvent cement of dia 75mm complete all as specified and directed. , s&f in repair10 litre capacity pvc valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including bracketscomplete all as specified and directed. , s&f in repairs pvc connections 15mm size with ptmt nuts of length 450mm fixed to pipes and valves complete all as specified and directed. , s&f in repairs wash basins, vitreous china (flat back or angle back type) any size size 550mmx400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply incl taps waste chain and plug and brecketswaste coupling brass cp 32 mm bore with long screwed shanksbedded in red lead cement and other end fixed and pillar taps 15 mm bore cast copper alloy fancy type chromium plated screwed down high pressure withlong screwed shanks screwedand removing debris out of mod land all as specified and directed. , taking down gi tubing 15mm bore all as specified and directed by engineer in charge. , s&f gi tubing 15mm bore medium gradewith all fittings fixed to wall and ceilingcomplete all as specified and directed. , s&f in repairs 15 mm bore bib taps cast copper alloy with chromium platedcrutch or butterfly handle scrwed, screwed for iron pipe or for brass ferruleand fixed complete all as specified.. , s & f in repair 15mm bore stop valveschromium plated screwed down,high pressure,with crutch or butterfly handle,screwed both ends for iron pipe or for unions fixed complete all as specified and directed , s&f in repairs of 600x450mm size bevelled edge mirror of selected quality glass 6mm thick mounted on any type of wall including polishingand fixed on wall withchromium plated studds and cup washers complete all as specified and directed. , s&f in repairs ss tubular towel rail ,d type 60 cm long between two flanges fixed on wall with studds complete all as specified and directed. , s&f in repair ss towel ring of ptmt fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 90gms) complete all as specified and directed. , s&f sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long , s&f in repair 15 mm stainless steel health faucet with 1.5 mtr long ss pipe and holder ,fixed to wall with screws and connection with pipe complete all as specified and directed. , dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by engineer in charge. , s&f framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde e 165 , s & f factory made steel window with side hung shutters incl boxtype hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded all as specified and as directed by engineer in charge. (as per td drawings ce (af)/ngp/2003/td/08 sheet 1/12 to 12/12 , s & f steel window with side hung shutters incl boxtype hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded all as specified and as directed by engineer in charge. (as per td drawings ce (af)/ngp/2003/td/08 sheet 1/12 to 12/12 , s & f steel ventilator with top hung shutters inclhinges with steel peg stay, complete all as specified and as directed by engineer in charge , s&fstainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. , m&l for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 sqm in each pane complete all as specified and as directed , cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cement concrete 1:2:4 type b 1, depth exceeding half brick but n. exc one brick complete all as specified , hacking out broken glass (any thickness, size quality or description ) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads all as specified and as directed. , roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, afe 290 (gde e 165)) quality b channel or flat sections) including distance pieces cleats etc., complete all as specified and directed by engineer in charge. , preparation new painted steel surfaces of any description over 10cm width or grith not otherwise described and applying two coat of synthetic enamel paint over one coat of red oxide and zinc chrome complete all as specified and as directed , dismantling of asbestos cement/gi corrugated or semi corrugated sheets as in roof covering all as directed. , s&f pre painted galvalume aluminum zinc coating gi based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. , s&f pre painted galvalume aluminum zinc coating gi based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. , demolition of cement concrete ( unreinforced) as in ground floor and paving not exc 15 cm thickness below or above gl , m&l for 75 mm thick pcc 1:3:6 type b i (40mm graded aggregate ), as in plinth protectioncomplete all as directed. , m&l pcc 1:4:8 type d2 75mm thick as in sub base comlete all as pecified and directed complete. , m&l for 100 mm thick pcc 1:2:4 type b 1 (40 mm graded aggregate), as in top layer including spike rolling to surface or making impressions of expanded metal, whilst the concrete is green complete all as directed. , m&l for preparation of old painted wooden surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. , m&l for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint complete all as specified and directed. , dismantling water tanks ,exc 250ltr but not exc 500 ltr and removing to store complete all as specified and directed. , s&f rotational moulded polyethylene water storage tanks of capacity 500ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in ssr part i , m& l for complete removal of existing treatmentof old internal surfacesapply two coat of oil emulsion distemper on wall surfaces over a coat of chalk white primer including wall care putty making smooth finish surface and complete preparaton of new surface complete all as specified and directed. , m& l for complete removal of existing treatmentof old external decorative surface of walls and applying two coat of cement base paint,over a coat of cement primer includingcracks filling with exterior wall care puttywhere ever necessary and as specified and directed. , m& l for preparing of old decorative surface ofceilings and applying one coat of white wash on ceilng including cornices etc complete with cracks filling with wall care putty where ever necessary and as specified and directed. , taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittingsand fixturesuch as switches, ceiling rose, light fittings etc & making good the surface on wall complete. , m&l for point wiring using approved colour coding as per is with 1.5 sq. mm two single core pvc insulated but unsheathedfr cable, 1100 volts grade, isi 694 marked with multistranded copper conductor and earth continuity wire with similar 1.5 sqmm cable (including connecting to earth dolly) drawn through isi marked heavy duty rigid pvc concealed conduit with all accessories etc with mild steel sunken box 50mm deep 1.6mm thick with earth dollyduly, concealed in the wall and havingmodular cover plate with a frame suitable for modular switch/ sockets/ regulators for the following: , one light point controlled by one switch one way. , onefan point controlled by one switch one way. , one 3 pin 5 amps socket outlet point controlled by one switch one way on same board. , one 3 pin 5 amps socket outlet point controlled by one switch one way on independent board. , all as per item no : 82point wiring with 2.5 sqmmsingle core coppercable and earth continuity wire with 2.5 sqmm single core cable for one three pin 15 amp socket outlet point on independent board. , s & f modular switch 01 way 06 amp, 01 module complete , s & f modular switch 01 way 16 amp, 01 module complete , s & f modular socket6 amp, 2/3 pin combined 2 module complete , s & f modular socket6 /16 amp, 2/3 pin combined 2 in 01, 02 modulecomplete , m & l replacment modular step fan regulator 120 watt 2 module suitable for 230 volt 50 hz supply all as specified , s & f ceiling rose surface bakelite 3 terminals 65 x 50mm, 230 v including pvc box of size 3x 3 round type , s & f in repair for wall mounted led 18/20w crca fitting 230 v with extruded aluminum heat sink provided for efficient heat dissipation and integral electronic driver connector block etc complete with all accessories internally prewired including necessary mounting arrangement, provision of new 2 core multi stranded copper conductor of size 0.5sqmm from ceiling rose to fitting including necessary polycarbonate led tube 4 feet, 18/20 w complete all as specified and directed. , s&f decorative recess mounted luminaire 34/36 watt led suitable for 600mm x 600 mm recess which provides glare free cool white symmetrical illumination and having integral electric driver connector block etc., complete & necessary mounting arrangement, provision of 2 core 0.5 sqmm multistranded copper conductor from ceiling rose to fitting complete all as specfiied and directed. , s&f for suspended type 4ft 36/40 w led fittings linear in sleek design 230 v with integral electronic driver connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 0.5 sqmm multistranded copper conductir from ceiling rose to fitting complete as specified and directed. , s&f for envirinment friendly high efficiency with better thermal management type building security light 35/36 watt with integral electric driver connector block etc., complete with all accessories internally prewired including necessary mounting arrangement, provision of 2 core 1 sqmm multistranded copper conductor from ceiling rose fitting complete all as specified and directed. , taking down ceiling fans of any size/sweep after disconnecting the wire from existing ceiling rose and refixing the same after cleaning dust, oiling, greasing including providing flexible cable from ceiling rose to connector of fan complete all as directed by engineer in charge. , s&f for mcb db tpn 4 way double door sheet metal enclosure comprising of oem/manufacturerspecified bus bar 415 volts, 50 hz bus bar and neutral link complete including inserting in wall complete all as specified. , s&f for mcb triple pole and neutral 415 volts, 63 amps, 10 ka. , s & f for ‘c’ curve mcb single pole & neutral 240volts 40 amps , s & f ‘c’ curve mcb sp 240 volt 6 to 30 amp , m & l for flame proof point wiring using approved colour coding as per is with 1.5 sqmm two nos single core pvc insulated but unsheathedfrls cable, 1100 volts grade, isi 694 markedwith multistranded copper conductor and earth continuity wire with similar 1.5 sqmm cable (including connecting to earth dolly) drawn through heavy duty isi markederw stove enamelled, steel conduit concealed in wall suitable for flame proof wiring, not less than 20mm dia with and including flame proof bends and elbows, couplers, bell mouth reducer , junction box all as per relevant is and type tested/ approved by cmri dhanbad all as specified forone light point /power point/ fan point controlled by one no. flp rotatory switch complete al as specified and directed by engr in charge. , s&f in repair new flame proof and wheather proof switch rotary type with termination box in lm6, 16a, single pole 250v suitable for hazardous locations of zone 1 & 2, ex d with relevant is & ip65 protection complete all as specified and as directed. , s&f in repair flameproof switch socket & plug combined in lm6 cable termination box in lm6, 16a,250v, 2p+earth for connection of 3 phase 415v rating equipment suitable upto 10 hp power connection complete all as specified and directed. , s&f cmri certified led flame proof 2x16/20w tube light fixture, recommended for ammunition shed, ip 65 protection complete with all accessories internally pre wired complete all as specified and directed make: crompton greave cat no. extn2lt8 16/20 or equivalent in sudhir/shyam/shakti. , m&l for plate earthingwith galvanisedmild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than2.25 m below normal ground level) with the top edge of the earth plate at a depth not less than 1.5 m below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and incl gi earth wirte 4 mm dia bolted (with gi nuts, bolts & check nuts) and riveted to earth plate at one end and connected to metallic bodies of equipment’s etc at the other endincluding 15 mm gi lightgrade protection pipe with allfittings from top of electrode to body of equipment fixed withiron clamps, bolts, nuts and washer and also including providing watering pipe 20mm bore gi pipe medium grade from bottom of earth pit to top of electrode complete with earth pit in pcc 1:2:4 type b 2 using 12 mm graded crushed stone aggregate and rcccover complete all specified and shown in electrical plate no 3 of ssr part 1 including testing earth resistance and submitting test report to age e/m by the contractor complete all as specified & directed. note : (i) earthing resistance required in earthing shall less than 3.0 ohms after completion of work. all earthing shall be tested by the contractor in presence of engr in charge.test result shall be recorded and signed by the contractor and engr – in charge.if contractor fail to achieve the above result the same shall be rectified by the contractor without any extra cost to govt.the earthing result will be required maintaining up to end of defect liability period of one year and if any variation found in earthing result during defect liability period same will be intimated to the contractor by engg in charge and contractor shall rectify the same. the quoted rates shall be deemed to include for above said provision. (ii) quoted rates shall be deemed to be included for earth wire with 15 mm dia protection pipe up to 7.5 length. , note: the amount against the schedule of credit mentioned in the tender document shall be deducted from the total amount quoted against sch a while deriving the contract sum for acceptance....

Military Engineer Services - Madhya Pradesh

35548927 tender for provision of certain rw, mw and lbw under ge ( awc ) mhow. exavation in post hole or smilar hoels each n exe 0.5 cum, getting out removing surplus soil to a distance n exe 50 m, complete all as specified and directed. 2 surface excavation n. exc 30 cm deep and averaging 15cm deep and getting out in any type soil, complete all as specified directed. 3 m & l for brick work with fly ash bricks, modular brick, straight or curved on plan exc 6 m mean radius, built in cm 1:6, complete all as specified and directed. 4 m & l 15 mm thick rendering in cement mortar 1:4 on brick work or concrete surface on wall or ceiling as in fins fascias, chajja louveres, parapets and railing exc 60 cm in height newels , balustrade with chicken wire mesh in two layer of plaster and finished even and smooth without using extra cement, complete all as specified and directed. 5 m&l for preparation of new surface of wall / ceiling and applying three coat of white wash, complete all as specified and directed. 6 s & f joist, channel, angle or tee, square or rectangular, tubler sections, fixed indipendenty or as purlin, rafter, or post including cutting to dead length where required, notching, drilling, fitting, riveting and / or welding or connecting with boldts, complete all as specified and directed. ( fe 410 w ( gde e 250 ) quality a ) , complete all as specified and directed. 7 m & l for preparing new steel surfaces of any description, over 10cm in width or girth, not otherwise describe and evenly applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed. 8 s & f pre painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick ( total coated thickness ) of any colour having tensile strength of 550 mpa minimum, yeild strength, it shall becoated with hot dip alloy of 55% aluminimum, 43.5% zinc, 1.5% silicon and finished with resin coat on both surface @ 150 gm / sqm of coating as specified and shall be fixed with hot dip galvanised, self drilling and self tapping screws neoprened and edpm washers as in roof covering, complete all as specified and directed. 9 s & f solid pvc wall / ceiling lining consisting of 5mm thick plain colour pvc sheet inclusive of solvent cement and fixing at site on pvc frame including dismantling, complete all as specified and directed. 10 s&f gi frame work for seamless ceiling comprises of gi perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm center to center channel 0.9 mm thick having two unequal flanges of 15 mm each and web of 45 mm suspended from soffit approx 900 mm center to center with gi cleat and steel expansion fastener with and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flanges of 26 mm each with lips of 10.5 mm fixed to intrermediate channel with connecting clips across the intermediate channel at 457 center to center, complete all as specified and directed. 11 m & l providing precast cement concrete louvers and jallies 50 mm thick of any size as approved by ge including all mouldings , frame etc, complete all as specified and directed. 12 s&f for tmt reinforcement bars 6 8 mm dia including all cutting bending binding cranking placing & binding with ms wire ( annealed ) not less than 0.9 mm dia, complete all as specified and directed. 13 s&f for tmt reinforcement bars 10 mm dia and over including all cutting bending binding cranking placing & binding with ms wire ( annealed ) not less than 0.9 mm dia, complete all as specified and directed. 14 s&f pre painted galvalume aluminium zinc coating steel based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa as in roof / covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed. 15 s & f in repair110 mm dia bore. pvc ( swr ) pipes single socketed in any length withrubber ring joints, fixed to walls, complete all as specified and directed. 16 s & f in repair 110 mm dia bore pvc ( swr ) bends any radius with solvent rubber ring joints, fixed, complete all as specified and directed 17 s & f in repair110 mm dia bore pvc ( swr ) junction single, single ( t ) equal or unequal with solvent rubber ring joints, fixed, complete all as specified and directed 18 s&f reienforced cement concretetype b0 1:2:4 beam, cantilever, bressummers, lintels over 1.5 m span, complete all as specified and directed 19 use and waste of formwork to sides and soffits of floor or roof beam , beam haunching , griders bressummers lintels cantilevers sup ports overhanhgs coloumn etc also splays between floor and beam for fair finished surface of concrete, complete all as specified and directed 20 demolition of reinforced cement concrete of any descriptionetc, complete all as specified and directed. 21 demolition of brick work built in cement mortar including all quoins arches pillars etc, complete all as specified and directed. 22 m&l for pcc ( 1:3:6 ) type c 1 with using 20mm graded stone aggregate as in plinth protection, bed blocks, coping, for fixing holdfast / lugs, filling hollow space of pressed steel door frame etc including necessary form work , complete all as specified and directed. 23 desmantling ofplain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed. 24 excavating over areas, not exceeding 1.50 m deep and getting out in any type of soil complete all as specified and directed. 25 m & l for cement concrete 1:4:8type d 2 ( 40 mm graded aggregate ) as in sub base, foundations, filling and mass concrete, complete all as specified and directed. 26 m & l 25mm thick cement concrete type b 0, 1:2:4 ( 12.5 mm graded aggregate ) as in levelling course in floor complete all as specified and directed. 27 m&l endura 300x300 vitrified full body tiles 12 mm th with water absorption <0.5%, average mor> 38 n / sqmm, breaking strenth >300 n, thermal shock resistance no damage, skid resistance ramp test >r9 alable color, 1st quality / premium in flooring & including 20 mm thick screed bed built in cm 1:4, complete all as specified and directed. 28 m&l granite 20 mm thick ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and likeincluding pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in cm 1:4, complete all as specified and directed. 29 providing and laying at or near ground level factory made kerb stone of m 25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 ( 1 cement: 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm ) , including making drainage opening wherever required, complete all as specified and directed. 30 m&l providing cement concrete 1:2:4 type b 0 ( using 12.5 mm graded crushed stone aggregate as in lintels upto 1.50 metre clear span, cills, steps, seismic & other similar bands, plinth courses, parapets & railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, complete all as specified and directed. 31 removing excavated material n exc. 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed. 32 desmantling of framed timber scantlings 40 sq cm and over in section, in any position, complete all as specified and directed. 33 excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for laying of cable etc.n exc 1.5 m in depth and getting out in any type of soil, complete all as specified directed. 34 returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified directed. 35 supplying and laying un reinforced precast concrete cable cover, class lv, type i, flat, size 250 mm x 150mm x 40mm, complete all as specified directed. 36 supply and laying fine sand for cable protection in layers including punning, complete all as specified directed.note: punned thickness shall be measured for the payment. 37 m&l for tubes, medium grade, galvanised, with all fitting of size 50 mm ;laid in trenches for cable protection all as specified and directed 38 supply and laying and testing cable xple insulated, screended , pvc badded galvanised steel strip or wire armoured electric power cable ( heavy duty ) 1100 volts grade with stranded aluminium conductor of25 sqmm4 core, complete all as specified directed. 39 supply and installation and commissioning lt panel board out door type , double door type made out of crca sheet 3 mm thick for outdoor frame and 2 mm thick for innner frame with400 amps rated aluminium bus bar , cubical type duly powder coated with two coat of synthetic enamel paint over a coat of mettalicprimer, incl necessary pcc work for grounting of feeder box 40 cm above the ground level by providing 60 cm long angle iron frame bottom of 40x40x5 mm thick , welded on all four corners , embedded in pcc 1:2:4 type b l complete with comprising the following complete with panel wiring suitable size of copper wire.note: the panel should be cpri approved.incoming: ( a ) mccb tpn 63amps, 415 volts 1 nos, ics=100% icu, ( b ) ammeters 0 100 amps with ct reting and selector switch 01 no ( c ) voltmeter with selector switch 0 500 volts 01 no ( d ) indicatin led lamps ryb ) 0i setoutgoing: ( a ) mcb tpn 63amps, 415 volts 4nos ( b ) mcb spn 32 amps , 415 volts 03 nos 40 m&l hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified directed. 41 m & l 60mm thick machine pressed precast concrete interlocking paver block fixing with grey cement and pigmentsof i shape or as approved by ge, and any colour and size confirming to is 15658 2006 of m 35 grade set, laid over and including 25 mm thick dust sand cushioning, filling of joints with sand & compaction using surface vibrator after filling of joints laid in any pattern as decided by engineer in charge including packing of sides by cement concrete finishing surfce even and smooth, complete all as specified and as directed. 42 earth work in excavation of all kind of soil by mechanical means ( hydraulic excavator ) means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and as directed. 43 earth work in excavation of all kind of soil by mechanical means ( hydraulic excavator ) / in foundation trenches or drains ( not exceeding 1.5 m in width or 10 sqm on plan ) , including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m, complete all as specified and as directed. 44 description same as per item no. 43.00 but each additional 1.5 m or part thereof in depth beyond the first 1.5 m, complete all as specified and as directed. 45 removing excavated material n exc. 50m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and as directed. 46 m&l for rcc ( design mix ) m25 ( 20 mm graded aggregates ) asin foundations, including rafts, footings, foundation beam, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete, complete all as specified and as directed. 47 m&l for rcc ( design mix ) m25 ( 20 mm graded aggregates ) as in columns, pillars, peirs, posts, and struts, complete all as specified and as directed. 48 m&l for rcc ( design mix ) m25 ( 20 mm graded aggregates ) as in beams , cantilivers , bressummers , lintles over 1.5 m span complete all as specified and directed. 49 m&l rcc m 25 ( design mix ) using 20mm graded stone aggregate as in slabs supported on walls, beams, and columns complete all as specified and directed. 50 m&l rcc m 25 ( design mix ) using 20mm graded stone aggregate as chajjas complete all as specified and directed. 51 use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits ( if any ) of foundation and plinth beams and similar work, verticalor to batter surfaces for rough finished flat surfaces of concrete, complete all as specified and directed. 52 use and waste of formwork rough finished surface of concrete as in square, rectangular or polygonal to sides of columns, pillars, posts, struts, piers etc.complete all as specified and directed. 53 m&l form work to soffits of suspended slabsuch as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick ( horizointal or slooping ) complete all as specified and directed. 54 m&l formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. 55 m&l form work to edges of concrate flats, treads, breaks in floors, androof n.exc 20 cm wide and sides of rcc / pcc bands in walls horizontal or sloping and similar work exc 10 cm but not exc 20 cm wide complete all as specified and directed. 56 s&f for tmt reinforcement bars 5 mm dia including all cutting bending binding cranking placing & binding with ms wire ( annealed ) not less than 0.9 mm dia over upto and including 10mm dia in stirrups, spacers and binders etc, complete all as specified and directed. 57 m&l brick work with fly ash modular bricks straight or curved on plan to any radius in half brick thick walls, built in in cement mortar 1:3 complete all as specified and directed. 58 m & l 40 mm thick damp proof course in cement concrete 1:2:4 type b 0 with incorporating integral water proofing compound in the manner specified by the manufacturer and in the proportions indicated, to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. note: wpc will be measured and paid separately. 59 m & l rendering 10 mm thick on brick wall / cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement , complete all as specified and as directed. 60 m & l 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement , complete all as specified and directed. 61 m & l plastering15 mm thick intwo layers of10 mm thick inbottom and 5 mm thick with wpc oftop layerin cement mortar 1:4 on brick wall / cement block wall or concrete surfaces, surfaces finished even and smooth without using extra cement , complete all as specified and as directed. note: wpc will be measured and paid separately. 62 supply only liquid water proofing compound all as specified and directed. 63 m & l preparation of new wall surface and apply one two of white wash on wall surface includingwashing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as specified and directed. 64 m&l forapplying 1 mm thick wall care putty on wallon internal old / new wall surfaces as per manufacturerer instruction complete all as specified and as directed 65 m & l for applying two coats of oil bound distemper over a coat of alkali resistant primer on prepared wall putty surfaces of internal wall all includingwashing floors, cleaning glass, joinery, electrical fittings, wiring etc. , of drops and splashes complete all as per specified and directed. 66 m&l preparing of newly plastered or unplastered surfaces of walls, cornices etc and applying two coats of cement base paint over one coat of cement primer, complete all as specified & directed. 67 m&l moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. 68 m & l 20 25 mm thick machine cut kota stone slab in flooring or treads of steps over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed.note: the size of kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. 69 description same as per item no. 68.00 but as in riser of steps, skirting, dado and vertical surfaces including 10 mm thick rendering in cm 1:4, complete all as specified and directed. 70 s & f framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to fe.290.gde e 165, complete all as specified and directed. 71 s & f powder coated aluminium sliding glazedwindows with three track shutter sliding ( two shutters glazed and one shutterwire mesh ) shall be following specification, complete all as specified and directed. ( i ) windows frame of cross section 101mm x 44mm x 1.5mm thick. ( ii ) three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick. ( iii ) sliding shutter frame of cross section40 x 18 x 1mm thick. ( iv ) 4 mm thick tintedglass superior quality. ( v ) idpe rubber guasket for fixing of glass. ( vi ) locking cleats per shutter 01 nos. ( vii ) sliding rollers per shutter 02 nos. ( viii ) aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 nos. 72 s&f powder coated aluminium ventilator cross section 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with idpe rubber gasket including aluminium beads, including preparation of jombs all around in cm 1:3 finishing even and smooth complete all as specified and directed. 73 cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type b 1, complete all as specified and directed. 74 s&f pressed steel frames size 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. 75 s&f2nd class hard wood 35 mm thick plain, framed, pannelled shutters ( any number of panels ) , with panels of timber flat on both sides ( feather edged ) , or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and directed. 76 s&f2nd class hard wood 35 mm thick glazed and skelton shutters, open rebated and prepared to receive glass, gauze etc, ( without sash bars ) , edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securingglass, etc, size of members of shutters as specified in ssr part i, section 8, clause8.24 ( a ) complete all as specified and directed.note : glass pane and wire mesh shall be measured and paid separately inrespective supply only item. 77 supply only galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. 78 m & l preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise description, over 10 cm width or girth apply two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. 79 s&f factory made solid pvc door frame of size 50 mm x 47 mm made out of 5 mm plain colour pvc sheet reinforced with ms square tube, all as specified and directed. 80 s&f 30 mm thick factory made solid panel pvc door shutter ( style ) consisting of frame made out of m.s. tubes of 19 gauge thick & size 19mmx19mm for stiles and 15mmx15mmfor top & bottom rails. m.s. frame shall have a coat of red oxide primer of approval make and shall becovered with 5 mm thick heat moulded plain colour pvc ‘c’ channel of size 30x50mm forming stiles and 5 mm thick wide pvc sheets for top rail , lock rail and bottom rail on either side and 10 mm ( 5mmx2mm ) thick having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour 5mm thick pvc sheet to be fitted in the m.s. frame welded / sealed to the stiles & rails with 30 mm widex5 mm thick pvc , sheet suitable pvc sheet beading, and joined together with solvent cement on either side, and additional 5 mm thick pvc stripes of 20 mm width is to be struck on interior side of c channel using pvc solvent adhesive complete at site as per specification complete all as specified and as directed. 81 s&f aluminium anodised barrel tower bolts 150 mm long of extruded section and fixed complete all specified and directed. 82 s&f aluminium anodised barrel tower bolts 200 mm long of extruded section and fixed complete all specified and directed. 83 s&f aluminium handles, size 150 mm cast type, anodised complete all as specified and directed. 84 s & fbutt hinges, size 100 mmtype c 21 extruded aluminium alloy with galvanised mild steel hinge pin, anodised isi marked, complete all as specified and directed. 85 s&f 250 mm long aluminium alloy, anodised sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy fixed, complete all as specified and directed. 86 s & f vitreous china squatting pan orissa patern size 580 mm x 440 mm, white, with integral foot rest ( excluding flushing cistern and flush pipe ) including connection to trap and to flushing pipe, anti syphonage pipe, etc complete all as specified and dircted. 87 s & f 10 litres capacity pvc low level cistern ‘ white’ with inlet, float valve and handle including flushing pipe of pvc 32 mm dia and connection to pipes complete all as specified and directed. 88 s & f chromium plated fancy type stop cock / angle cock 15 mm dia cast copper alloy screwed down, high pressure, with crutch or butter fly handle screwed both ends for iron pipeor for unions and fixed, complete all as specified & directed. 89 s & f pvc connection 15 mm dia 600 mm long with ptmt nuts at both ends complete all as specified and directed. 90 s & f 15 mm bore bib taps chromium plated fancy type cast copper alloy crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, and fixed complete all as specified and directed. 91 s & f vitreous china wash hand basin white or any colour , flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia pvc waste pipe complete all as specified and directed. 92 supply only 15 mm dia bore fancy type chromium plated pillar tap, cast copper alloy, with capstan heads, screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed. 93 s&f 600mmx450mm bevelled edge looking mirror of selected quality glass, mounted on 6 mm thick ac building board or commercial plywood and fixed to wooden / pvc plugs with chromium plated brass screws and cup washer 94 s & f brass chromium plated tubular towel rail, 20mm dia d type 60 cm long between flanges complete all as specified. 95 s & f vitreous china bowl urinal flat back, size, of 465 x 355 x 265 mm white ( minimum ) , with grating and union for discharge pipe complete all as specified and directed. 96 s&f pvc ( swr ) 75 mm bore pipes single socketed in any length with rubber ring joints with solvent cement fixed to walls&flooor incluidng clamping complete all as specified and directed. 97 s & f in 75 mm bore pvc ( swr ) bends any radius with solvent rubber ring joints, fixed, complete all as specified and directed. 98 s & f in 75 mm bore pvc ( swr ) junction single, single ( t ) equal or unequal with solvent rubber ring joints, fixed, complete all as specified and directed 99 s & f pvc ( swr ) nahani trap / floor trap with grating having diameter of outlet 75 mm including jointing to waste pipe with solvent cement complete. 100 s & f110 mm bore pvc ( swr ) vent cowl including taking out existing unserviceable cowl, complete all as specified and directed. 101 s & f of cpvc 20 mm outer dia pipessdr 11 & plain cpvc sdr 11 fittings on walls / ceiling or laying in floors, complete all as specified and directed. 102 s & f of cpvc 25 mm outer dia pipessdr 11 & plain cpvc sdr 11 fittings on walls / ceiling or laying in floors, complete all as specified and directed. 103 s & f of cpvc brass elbow ( 3 / 4 x ½ ) for 20 mm outer dia cpvc pipe complete all as specified and directed. 104 s & f of cpvc male brass threaded adaptor ( mta / mbta ) for 25 mm outer dia pipe complete all as specified and directed. 105 s & f of cpvc ball valve for 25 mm outer dia pipe complete all as specified and directed. 106 s&f rotational moulded poly ethylene water storage tanks ( isi marked ) ( cylinderical vertical with closed top ) 1000 litres capacity , hoisted and fixed in position including dismantling of pvc water tanks exc 500 ltr but not exc 1000 ltr, complete all as specified and directed. 107 s&f ball valves high pressure of ptmt with epoxy coated aluminium rod & high density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed. . ( minimum weight 25mm 455 gms. ) complete all as specified and directed. 108 m & l non skid ceramic coloured tiles 7 to 8 mm thick ( square / rectangular ) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in cm 1:6, complete all as specified and directed 109 m&lglazed ceramic coloured tiles on vertical surfaces 450x350x7 mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat to receiving to wall tiles incement mortar 1:4, complete all as specified and directed. 110 m&l granite 20 mm thick ( of any type ) work ( table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and likeincluding pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in cm 1:4, complete all as specified and directed. 111 m&l rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges ( any type ) and polishing to match the adjoining surfaces, complete all as specified and directed. 112 s & f tubular rolled sections as post, rafter, purlin, and its connected wk for shed structure and similar work complete using erw or induction butt welded tubes conforming to i.s. 1161 1976 grade st. 240, complete all as specified and directed. 113 s & f pre painted galvalume aluminium zinc coating gi based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in sun shade, roof covering / cladding to wall, and similar work fixed with self tapping screws complete all as specified and directed. 114 m&l water proofing treatment on non approachable / non accessible roof surface ( horizontal & vertical surfaces ) in following sequence through authorized applicator of the manufacturer all as specified and directed complete. ( i ) cleaning of new rendered surfaces properly and drying the surfaces. ( ii ) applying a coat of oxidised bitumen based solvent primer @ 0.30 kg / sqm ( iii ) laying 3 mm thick app modified water proofing membrane with 100 mm over laps sealed and bounded to the surfaces by torchon method. ( iv ) applying two coats of bitiminous aluminium paint @ 200 gram / sq m ( minimum ) in two coats .make incorporated : hyperplas polyster of iwl ( india ) ltd or equivalent in pidilite industrries ltd / stp ltd all as specified and as manufacturer instruction , complete all as specified and directed. 115 m&l salt glazed stoneware drain pipes 150 mm internal dia ofgrade ‘a’ laid in trenches & jointed as specified, complete all as specified and directed. 116 m & l 1:3:6 typec 2 using 40 mm graded stone aggregate cement concrete bedto drain pipe including packing under and haunching against side of pipe for150 mm bore ofpipe complete all as specified and directed 117 s&f sand stone slab in sun shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n.exc. 2m in length, punched dressed on faces and along exposed edges, self faced on other side, thickness of sand stone slabs 50 mm thick, complete all as specified and directed. 118 s & f reinforced concrete pipes 300 mm bore, class np2 , laid and jointed complete with collars, including demolition and breaking up drain pipes, complete all as specified and directed. 119 m&l point wiring with 1.5 sqmm ( nominal cross sectional area ) single core, pvc insulated, unsheathed frlsh copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non metallic, rigid non mettalic pvc conduit ( medium grade ) concealed in wall / ceilingwith and including 1.5 sqmm single core pvc insulated, multistranded, unsheathed, frlsh copper conductor cable as continuous earth continuity conductor ( green in colour ) with cast iron / pressed steel modular terminal boxes any size / module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size / module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessoriesone light / fan / bell controlled by one, one way switch 5 / 6 amps, complete all as specified and directed. 120 description same as per item no. 119.00 but for one 3 pin, 5 / 6 amps socket outlet point on independent boardcontrolled by one, one way 5 / 6 amps switch, complete all as specified and directed. 121 description same as per item no. 119.00 but for one 3 pin, 5 / 6 amps socket outlet point on same boardcontrolled by one, one way 5 / 6 amps switch, complete all as specified and directed. 122 m&l point wiring with 2.5 sqmm ( nominal cross sectional area ) single core, pvc insulated, unsheathed frlsh copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non metallic, rigid non mettalic pvc conduit ( medium grade ) concealed in wall / ceilingwith and including 2.5 sqmm single core pvc insulated, multistranded, unsheathed, frlsh copper conductor cable as continuous earth continuity conductor ( green in colour ) with cast iron / pressed steel modular terminal boxes any size / module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size / module, for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15a socket point independentcompleteall as specified and directed. 123 s&fceiling rosethree terminals surface bakelite type, ac, 50 hz, 230v complete all as specified and directed. 124 s&f modular switch1 way 6 a , 1 modulecomplete all as specified and directed. 125 s&fmodular socket 6 amps 2 / 3 pin combined2 module complete all as specified and directed. 126 s&f switch modular type 16 a, 1 module complete all as specified and directed. 127 s&fsocketmodular type multipurposes 6 / 16 a, 2 module complete all as specified and directed. 128 supply and fixing surface / wall mounted led batten poly carbonate housingfor retrofitled tube t 8 type upto 1x20 watt, 4 feet longpre wired incl integrated electronic driver complete with all connectedaccessories all as specified and directed. 129 supply and fixing retrofitled tube t 8 type1x20 watt, 5700 to 6500 k and thd less than 15% , polycarbonate body , glass tube 4 feet longcomplete with 02 years warrenty all as specified and directed. 130 s&f 10 w led batten 2 feet long, wall mounted, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver with system efficiency 110 lumen / watt, lumen output >=1100 lumen complete all as specified and directed. 131 supply and fixingexhaust fans ac single phase 230 voltpvc bodyof size 250mm sweep with louver completeincluding provision of pvc flexible copper cable of size 23 / 0.0076 two core from ceiling rose to exhaust fan forconnection andcutting opening of windowsfor fanbase ( ply wood sheet 12 mm thickrequired size ) , necessary fixing arrangements complete all as specifiedand directed.note : cost of suitable opening window and 12 mm thick ply woodfor fixing exhaust fan is deemed to be includedin overall rate quoted. 132 s & fled bldg security light fitting30wattmade up of pressure die cast aluminium housing with highly efficient leds as lighting source with acylic cover as diffuser with ip 66 and ik 07 protection thd < 10% lumen output >=110 lumen per watts complete incl gi pipe 40 mm size 1 meter bend into size for fixing of security light with suitable bracket complete all as specified and directed. 133 s&f mcb db spn 12 way double doorip 43, ik 09 with 200 amps rated bus bar , 230 volts, 50 hz complete all as specifed and directed. 134 supply & fixmcb spn 32 amps current rating c series 10 ka breaking capacity of the same make as item no 13 complete all as specified and directed. 135 supply & fixmcb sp 6 to 32 amps current rating c series 10 ka breaking capacityof the same make as item no 13 complete all as specified and directed. 136 supply and fixing tv socket outlet complete all as specified and as directed. 137 supply and fixing telephonejacket complete all as specified and as directed. 138 m & l sub main wiring with 2 runs of 4 sqmm main wire along with 1 run of 4 sqmm earth wire ( green in colour ) single core frlsh pvc insulated, unsheathed, multi stranded, 1100 volts grade isi marked copper conductor cable, drawn through and including adequate size rigid non metallic pvc concealed / surface conduit ( medium grade ) wherever necessary with all fittings & accessories including cutting chases for conduits as required, sinking for terminal boxes, making good disturbed surfaces complete all as specified and directed.note: two runs of main copper conductor, one run of earth wire and one run of pvc conduit shall be measured as one unit length. 139 s&f exhaust fan , steel body ac single phase230 volt of size 300 mm mmsweep complete with blade, frame and louvers all as specified and directed incl making of hole in brick work wherever necessary making good disturbed surface, painting to match with existing surfaces, complete all as specified and as directed. 140 supply , fixingrigid non metallic pvc conduit fixed conceiled / on wall wherever necessary with all connectedaccessories20 mm dia forcable tv connections, complete all as specified and as directed. 141 supply and fixin replacement of ceiling fan 1200 mm sweep , bldc fan with power factor of > / =.0.90 for air delivery of 220 m / cum minimum service value of 8 with capacitor type modularfan regulator ( without remote ) , completeall as specifeid and as directed. 142 supplying, laying, fixing, jointing and testing lt under groundxlpe insulated, galvanised steel strip or wire armoured heavy duty electric cable with aluminium conductor , multi stranded 1100 volts grade, cross sectional area 16 sq. mm 2core, isi 7098 marked, with electric connection lugs, laid in trenches / under floor under pcc / interlocking tiles incl making good of surface with pcc / cementing or fixed naked with walls / on poles / in ducts / in gi pipes etc and including taking down completetrenches / all as as directed at site.note: excavation, earth work, sand cushioning, protection tiles / brick / block shall be measured and paid seperately. 143 tubes, light grade, galvanised, with all fitting of size 40 mm ;laid in trenches for cable protection all as specified and directed. 144 m&lof earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground vertically to a depth not less than 2.25 meters deep below ground levelwith top edge of the plate not less than 1.5 mtrs below normal ground level connect to galvanised earth lead wire of 4.0 sqmm size by means of bolts, nuts, check nuts and washers of galvanized iron or steel up to 7.5 meter length including connected to earth plate including necessary excavation & earthwork, pcc ( 1:3:6 ) type c 1 earth chamber, 40 mm thick rcc cover 1:2:4 mix with 6mm dia nominal reinforcement @ 150 mm c / c both ways etc completeall as shown in electrical plate no 5, connected to earthing test point complete including testing on completion all as specified....

National Fertilizers Limited - Madhya Pradesh

35445817 tender for contract for “white washing and painting of residential and non residential buildings in township and factory areas white washing with lime to give an even shade : a ) old work ( one or more coats ) 2 b ) new work ( three or more coats ) 3 preparing surface with colour washing with lime and adding pigment of required shade :a ) on old work ( one or more coats ) 4 b ) on new work ( two or more coats with a basecourse of white washing with lime ) 5 distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :a ) on old work ( one or more coats ) 6 b ) on new work ( two or more coats over and including priming coat of whiting ) . 7 painting one or more coats on rain water pipes / soil wastepipes and vents and fittings, water supply pipes with ready mixpaint of approved brand and manufacture on old work : a ) pipes upto 75mm dia including gi pipes of water supply. 8 b ) pipes more than 75mm dia. 9 finishing of walls with waterproofing cement paint of approvedbrand and manufacture of required shade to give an even shade: a ) on old work ( one or more coats ) 10 finishing of walls with waterproofing cement paint of approvedbrand and manufacture of required shade to give an even shade: b ) on new work ( three or more coats ) 11 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade on : a ) on old work ( one or more coats ) 12 wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade on : b ) on new work ( two or more coats ) 13 painting with synthetic enamel paint of approved brand and manufacture to give an even shade on :a ) on old work ( one or more coats ) 14 b ) on new work ( two or more coats ) 15 painting with aluminium paint of approved brand and manufacture to give an even shade one or more coats on old work. 16 a ) lettering with black japan paint of approved brand and manufacture. ( the painting of background surface shall be paid separately ) . 17 b ) lettering in required shade with paint of approved brand and manufacture. ( the painting of background surface shall be paid separately ) . 18 painting with black anti corrosive bitumastic paint of approved quality to give an even shade one or more coats on old work. 19 finishing with polyurethane paint clear transparent finish without strainer on old work ( two or more coats ) of good quality. ( preferably touch wood of asian paints to be used as per specifications thereof ) .on old work ( one or more coats ) 20 applying priming coat with ready mix zinc chromate primer of approved quality on steel work ( doors, windows, pipes, structures etc. ) 21 applying priming coat with ready mix pink or grey primer ofapproved quality on wood work including preparations of surface asper directions of engineer in charge. 22 removing white wash, colour wash or cement paint byscraping, brushing, sand papering and preparing the surface smooth. 23 removing dry or oil bound distemper by scraping, sand papering and preparing the surface smooth. 24 finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: old work ( two or more coats applied @ 1.43 ltr / 10 sq.m. ) over existing cement paint surface 25 providing and applying two neat coats of elastomeric, acrylic water proof exterior coating as per manufacturer’s specifications with dr. fixit raincoat of pidilite industries or equivalent, over one coat of primer ( composed of acrylic emulsion polymer ) with dr. fixit prime seal or equivalent approved primer as per manufacturers specification or directions of engineer in charge.. work includes making approach by scaffolding etc. and surface preparation. 26 painting on conc. floors / walls / plastered surfaces with high build chlorinated rubber paint as per instructions of engineer in charge a ) on old work ( one or more coat ) 27 painting on conc. floors / walls / plastered surfaces with high build chlorinated rubber paint as per instructions of engineer in charge b ) on new work ( two or more coats ) including priming coat as per manufacturer...

Military Engineer Services - Madhya Pradesh

35316363 repair to misc b / r items at dronachal bhopal. demolition of cement concrete in ground floors and pavings not exc. 15 cm thickness ( below / above ground level ) including floor finishes complete all as specified and directed 2 m&l for 75mm thick pcc 1:3:6 type c1 ( using 20mm graded stone aggregate ) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified and directed 3 use of forming contraction ( dummy ) joints 65mm deep x 10mm wide, filled with sealing compound grade a in plinth protection complete all as specified and directed 4 dismantling floor hearthor wall tiling including cement mortar bedding ( but not backing ) , removing serviceable tiles to store and rubish of the premisses complete all as specified and directed 5 m&l for approved colour & shade virified ceramic tiles 9 10 mm thick ( square / rectangular ) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6complete all as specified and directed 6 all as per item no. 05 but as in skirting incl 15mm thick rendering in cm 1:4 complete all as specified and directed 7 m&l for coloured non skid ceramic tiles 7 to 8 mm thick ( square / rectangular ) , coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in cm 1:6complete all as specified and directed 8 m&l for 25mm thick pcc 1:2:4 type b 0 using 12.5mm graded stone aggregate, including finishing of concrete topping even and rough complete all as specified and directed. 9 m&l for coloured non skid ceramic tiles 7 to 8 mm thick ( square / rectangular ) , coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in cm 1:6 complete all as specified and directed 10 m&l for coloured glazed ceramic tiles in vertical surface 200 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in cm 1:4, complete all as specified and directed 11 m&l for coloured glazed ceramic tiles in vertical surface 450 x 300 x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in cm 1:4, complete all as specified and directed 12 m&l for grinding and polishing on existing old stone surfaces and skirting complete all as specified and directed by engg in charge. 13 material and labourfor sunken floor treatment as follows: 14 ( i ) demolition of cement concrete in sunken floors incl. removing dubrish outside md land complete all as specified and directed. 15 ( ii ) brushing neat cement slurry with 3.0kg of cement per sq. metre mixed with wpc @ 3% by weight of cementas per manufacturers instructionto fill all hole and crack complete all as specified and as directed. note: water tightness testing should be done after 24 hours 16 material and labourforpcc ( 1:1 1 / 2 :3 ) type a 0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. note : water proofing compound will be measuredand paid separately. 17 material and labourfor plastering on vertical sides and top surface ofcm ( 1:3 ) 15 mm thick mixed with water proofing compound as per manufacturer instructions. plaster shall be extended over pcc coving when the same is green i.e. pcc& plaster be carried out at the same time. note :water proofing compound will be measuredand paid separately. 18 material and labourfor 2 coats of dr. fixit krystalline waterproofing coating compound shall be applied after laying sewage / plumbing pipes with fixtures in position complete all as specified and directed. 19 material and labourfor filling the sunken floor with pcc ( 1:5:10 ) type e 2 using brick aggregate over the treated surface complete all as specified and directed. 20 material and labourspouts of50mm dia gi pipe light grade projecting 450mm clear of face outer wall with pvc mosquito proof cap on inner face of pipe shall be provided to drain out seepage water , if any. 21 note : water tightness testing should be done after applying dr fixit epoxy compound, by pounding water for 72 hours & rectify defects if any till total elimination of defect. dubrish to be removed outside md land. 22 s&f in repairvitreous china wash hand basin ( 550x400mm ) white, flat back excluding taps but including brackets & cp waste coupling 32mm, ldpe waste pipe 32mm upto floor complete all as specifed and directed. 23 s&f in repairs vitreous china urinal half stall type with fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in white cement, with brackets, flush pipe, and union for discharge pipe, ptmt spreader and ptmt waste coupling 32mm & waste pipe, pvc connection pipe 450mm for flushing ( excluding flushing cistern ) . 24 s&f in repair vitreous china wash down water closet pan ( pedestal pattern ) , white and trap including seat cover & pvc flushing cistern 10ltr capacity, fixing bolt, flush pipe, connection to drain ( or out goind pipe ) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed. 25 s&f in repairs vitreous china squatting pan, ‘orissa’ pattern, size 580 mm x 440 mm, white with integral foot rests, embedded and set in pcc 1:5:10 type e 2 incl pvc flushing cistern 10ltr capacity and flush pipe and making good to floor including removing rubbish complete all as specified and directed 26 s&f in repairs 32mm bore and 80cm long pvc waste pipe for whb / urinal complete all as specified and directed. 27 s & f in repair 10 ltrs capacity pvc low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia pvc flush pipe complete all as specified and as directed. 28 s&f in repair fancy type 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘hot or ‘cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed. 29 s&f inrepairs brass chromium plated shower rose with swivel joint not less than 50mm dia and notless than 200mm long complete all as specified and directed 30 s&f in repairs cp soap dish, fixed to plugs with screws. 31 s&f in repair 15mm bore fancy type cp bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed. 32 s&f in repair two way bib tap 15mm dia complete all as specified and directed. 33 s&f in repair cp towel rail 450mm long fixed with and incl cp brass screws complete all as specified and directed. 34 s&f in repair cp towel ring of approved design and pattern by ge. 35 s&f in repair 15mm bore dia chromium plated stop valve / angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed 36 s&f in repair cp toilet paper holder all as specified and approved by engr in charge. 37 s&f in repairs pvc connection 15mm dia of length not less than 450mm with both ends, brass fly nut suitable for hot & cold water supply complete all as specified & as directed. 38 s&f in repair cp jet spray with flexiblepipe length not less than 1.00mtr ( minimum ) fixed to ewc suitable for 15mm bore pipe complated as directed. 39 s&f in repair brass cp hand spray ( health faucet ) with flexiblepipe length not less than 1.00mtr ( minimum ) fixed to ewc / iwc suitable for 15mm bore pipe complated as directed. 40 s&f in repair fancy type, brass cp wall mixer for mixing hot and cold water with provision of overhead shower with area & long pipe & wall flanged screwed down for pipe of 15mm bore size complete all as specified and directed 41 taking up or down pvc / steel tubing of15 / 20 mm bore and connections complete all as specified and directed 42 s&f in repairs cpvc pipe 15mm dia of grade sdr 11 ( class i ) including all cpvc and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed. 43 s&f in repairs cpvc pipe 20mm dia of grade sdr 11 ( class i ) including all cpvc and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed. 44 cutting channels, grooves or rebates n exc 15cm girth, and trimming surface all as directed by engr in charge 45 s&f in repair 600mmx450mm looking mirror of selected quality glass, mounted on 6mm thick ac building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed 46 s&f in repair pvc ( swr ) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type b 1 ( 1:2:4 ) complete all as specified & as directed. 47 taking down eaves gutters and rainwater pipes ( any size or pattern ) , including all fittings, heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store ( measured overall as fixed along the centre line over fittings and accessories ) 48 s&f 75mm dia pvc ( swr ) pipe and single socketed in any length with rubberring joint laid in trenches or in floor complete all as specified and directed 49 s&f 75mm bore pvc ( swr ) bend in any radius complete all as specified and directed 50 s&f 75mm bore pvc ( swr ) junction ( single ‘t’ ) equal or unequal with access door complete all as specified and directed 51 s&f in repair 110mm dia pvc ( swr ) pipe and single socketed in any length with rubberring jointlai in trenches, floors or fixed to walls. 52 s&f 110mm bore pvc ( swr ) junction ( single ‘t’ ) equal or unequal with access door complete all as specified and directed. 53 s&f 110mm bore pvc ( swr ) vent cowl complete all as specified and directed. 54 s&f 110mm bore pvc ( swr ) bend in any radius complete all as specified and directed 55 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed. 56 taking down chowkhats or frames with shutters ( without taking off shutters from the frames ) n exc 1.5 sqm each complete all as specified and directed. 57 taking down shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed 58 taking down shutters of any description exc n exc 1 sq meach complete all as specified and directed 59 taking down and refixing shutters in same opening after adjusting the size, of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed 60 m&l for pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed 61 s&f 2nd class hard wood transomes or mullions, straight, for solid frames of any description, wrought, framed, double rebated on the solid, rounded or chamfered ( including weathering to transome, if required put together with glue, pinned at joints ) , supplied and fixed complete all as specified and directed 62 s&f 35mm thick second class hard wood factory made, plain framed panelled door shutter ( any number of panels ) with panel of 9mm thick bwp commercial plywood or 12mm thick veneered particle board medium dencity, wood partical board with commercial face veneers. the size of members of shutters shall be as specified in section 8 clause 8.20 ( a ) of ssr part i 1991. 63 s&f 35mm thick second class hard wood factory made glazed and skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. note: size of member of shutters as specified in ssr part i 1991 section 8 clause 8.24 ( a ) . 64 s&f 35mm thickflush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed 65 s&f solid pvc door frame ( approved color ) of size 50mm x47mm made out of 5 mm plain colour pvc sheet reinforced with m.s. square tube, fixing in opening as per specification and drawing complete all as specified and directed 66 s&f factory made solid panel pvc door shutter ( approved color ) 30mm thick ( stiles ) consisting of frame made out of ms tube for top and bottom rails. ms frame shall be covered with heat moulded plain colour pvc c channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail.penelling of plain colour pvc sheet to be fitted to the ms frame welded / sealed to the stiles and rails with suitable pvc sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. 67 dismantling boarding, any description, fixed in any position with screws etc complete all as specified and directed 68 s&f 16mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed to frame work complete all as specified and directed 69 s&f16mm thick veneered particle boards interior grade, solid core, general purposes type, with face veneers of type bb, fixed with screws to timber frame work complete all as specified and directed. 70 s&f 2nd class hard wood plain fillet sq. rect and triangluar in section, wrought secured with sectional area exc 13 n exc 25 sqcm complete all as specified and directed. 71 s&f 75mm size hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed. 72 s & f 30mm continuous ( piano ) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed. 73 s&f magnetic catchesfor cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple complete all as specified and directed 74 supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . note : fixing only rate is included in window / door shutter item considered therein. 75 s & f 100mm size butt hinges, medium weightcold rolled, stainless steel and fixed complete all as specified and as directed. 76 s&f aluminum tower boltsof extruded section of size150mm complete all as specified and directed 77 s & f 125 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. 78 s&f 150 mm size extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed. 79 s&f 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed 80 s&f double body floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed 81 m & l preparing new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coat of synthetic enamelpaint over a coat of pink primer complete all as specified and directed. 82 s&f in repairs 100mm size butt hinges, medium weightcold rolled, stainless steel and fixed complete all as specified and as directed. 83 s&f in repairs aluminum tower bolts of extruded section of size 150mm complete all as specified and directed. 84 s&f in repairs 125 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed. 85 s&f 150 mm size extruded aluminium alloy handles, fabricated type., anodised handles complete all as specified and directed. 86 s&f in repairs 300mm size aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. 87 s&f in repairs double body floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed. 88 s&f in repair ms 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete all as specified and directed. 89 s&f in repair ss kitchen plate rack made out of 1mm thick sheet of size 900x600mm of best quality of approved make complete all as specified and directed. 90 s&f in repair pvc mirror cabinet of size 0.45x0.30m with door shutter complate all as specified and directed. 91 s&f in repair corner glass shelf made out of 5mm thick glass of size 225x225mm round edge provided with ss railing fixed to wall using 2 no ss bracket complete all as specified and directed. 92 s&f in repair door closer hydraulically regulated, designation no. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed. 93 dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified and directed. 94 framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides ) and hanging; also fastening and fixing complete all as specified and directed. 95 s&f mild steel, plain, black sheet 0.63mm in hearths; covering to door shutters; covering to door chowkats ( frames ) ; chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holesunched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded / riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. complete all as specified and directed. 96 m&l for hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters complete all as specified and directed. 97 m&l for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. 98 m&l double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including neccesary cutting and holes complete all as specified and directed. 99 s&f in repair 12mm thick toghened frosted glass pane area exc 0.50 sqm in each pane fixing as door / windows or partition with rubber gasket , glazing clips and bedding and necessary fittings i.e fancy type handle ( not less than 300mm ) , locking arrangement etc complete all as specified and directed 100 demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed. 101 m&l 20 mm thick granite ( of any type ) work ( table rubbed and polished ) as in steps, jambs, pillars, window cills, cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar ( 1:4 ) , including pointing in white cement ( 1:2 ) using marble dust with admixture of pigment to match withshade of granite complete all as specified and directed. 102 dismantling wall and ceiling boards ( fibre, pulp, insulation, etc. ) or insulation boards / slabs / blankets, any thickness, including cover fillets and framework etc complete all as specified and directed. 103 gl frame work for seamless ceiling comprising of gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with gl cleat and steel expansion fasteners with and including ceiling section ( not exc 1.2 m length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including hangers and hanging arrangements, includingproviding and fixing12 mm thick seamless calcium silicate ceiling board made out of1800 x 1200mm size board, comprising of of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having phillips head with under head cutter at minimum spacing of 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seamless finish and multi layer design, complete all as specified and as directed. 104 preparing new surfaces of seamless ceiling and applying two coats of oil bound distemper over a coat of primer, complete all specified and as directed 105 m&l for preparation of old decorated plastered or unplastered surfaces and applying one coat of white wash on walland cleaning premise clean & tidy complete all as specified and directed. 106 m&l for preparation of old decorated plastered or unplastered surfaces and applying one coat of white wash on ceiling complete all as specified and directed. 107 m&l for preparation of old plastered or unplastered surfaces in walls soffits, facia, chajjas and applying one coat of exterior weather proof water based emulsion all as specified and directed. 108 m&l for preparation of old decorated surfaces of wallsincl brooming, scrapping down smoke dust, mass efflorescent, treading oil, grasy spots and stopping nail marks by applying two coats of exterior weather proof water based emulsion paint over one coat of compatible primer all as specified and directed. 109 m&l for complete removal of existing treatment on walls and applying 1 coat of wall care white putty ( jk birla ) 1mm thick and applying 2 coats of oil bound distemper over a coat of wall priming paint complete all as specified and as directed 110 m & l for preparing of old distempered surface of wall and applying one coat of oil bound distemper complete all as specified and directed. 111 all as per item no 102 above but on ceiling complete all as specified and directed. 112 preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified & directed. 113 all as per item no 104 above but on steel surface complete all as specified and directed. 114 taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified. 115 m&l for rendering10 mm thick on stone masonry surfaces or surface other than fair faces of brick work in cm 1:6, finished even and smooth w / o using extra cement complete all as specified and directed. 116 m&l for preparing of newly plastered surface of walls and applying one layer of white putty and two coats ofoil bound distemper over a coat of primer etc complete all as specified and directed. 117 m&l for rendering5 mm thickin cm 1:3onceilings finishedeven and smooth without using extra cement. 118 m&l for preparing of new plastered surface and applying two coats ofwhite wash in ceiling complete all as specified and directed. 119 m&l for rendering15 mm thick in two coats over brick work or concretesurfaces, 10mm thick in cm 1:4 backing coat and 5mm thickin cm 1: 4 mixed with wpc complete all as specified and directed. 120 material & labour for preparation of newly pastered surface applying two coats of 100% premium acrylic emulsion paint having voc less than 50 gm / litre and uv resistance as per is 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade ( company depot tinted ) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 sqm etc complete all as specified and directed. 121 supply only integralwater proofing compound ofapprovedmake...